SUN PROJECT SP-12500 Green Gas Pressure Regulator with Meter for Airsoft Guns

This external carbon dioxide (CO2) power system has a lower environmental impact than standard refrigerant gas. Its pressure changes little with temperature, maintaining stable power even in low-temperature environments or when the temperature drops due to rapid fire. It's also the most compact external-source system available. Due to its characteristics, it's a popular system in the speed shooting world, and with the increase in tatami room shooters due to the stay-at-home lifestyle, it's now experiencing a quiet boom.

Regulator (pressure regulator) for Green Gas 74g
With discharge pressure meter (15mm acrylic cap)

The upper opening/closing knob allows you to adjust the discharge pressure from 0 to the maximum set pressure.
You can adjust the pressure while checking it visually with the meter.
*The meter displays up to 1 MPa, but this is to prevent damage to the meter, and pressure adjustment is limited to within the maximum pressure range.

Size: W60mm x D32mm x H74mm (including accessories) Weight: 245g
Maximum discharge pressure: 0.5MPa (±0.05MPa)

■Set contents
Regulator (with 6mm hose joint) 1 unit, Cylinder stand 1 unit
Green Gas 74g 1 bottle

■About the Green Gas System
●The Green Gas System is a product that supplies stable external pressure to recreational gas guns.
Unlike freon gas, there is no pressure drop due to temperature drops in winter, and the gas temperature drops during continuous firing.
The pressure drop due to this is significantly less, so it can be used with stable gas pressure throughout the year.
●The regulator has a maximum discharge pressure setting. The pressure cannot be changed beyond the setting.
If abnormal pressure occurs inside the regulator due to the inflow of raw gas, the safety valve will operate and the internal pressure will
Release the internal pressure.

■Precautions for use
●Never use any gas cylinders other than our genuine green gas.
●Never modify, alter or repair the regulator yourself.
After connecting to the gun, please check the bullet speed before use. Always measure at the regulator's maximum discharge pressure.
Please say so.
When using carbon dioxide gas cartridges, please handle them correctly according to the instructions in the device's instruction manual.
Please.
●Avoid direct sunlight and do not place in places where the temperature exceeds 40°C.
●Even if a small amount of gas leaks out when installing, just screw it in all the way.
●After installation, do not remove from the appliance until all the gas has been discharged.
●Please use within the temperature range of 0 to 40°C.
●If white frost forms on the surface, do not touch it directly with your bare hands. Instead, wrap gloves or a cloth around it to remove it.
●After confirming that there is a hole in the seal of the used cartridge, dispose of it as non-combustible waste.
Also, do not throw it into fire.
●Please store in a safe place out of reach of children.
 
■JAN code: 4545081100776

*The color and texture may differ from the photo.

[Ages 18 and over] [Not eligible for airmail]