The long-awaited next-generation MP5 electric gun variation is here!

To mark the 30th anniversary of the electric gun's release, the next-generation electric gun MP5A5, featuring a completely new system, is here! This new model will be released in December 2022.

The latest model in the next-generation MP5 series employs an FET (electronic trigger system) and is equipped with the highly safe "M-SYSTEM," which uses a microcomputer to comprehensively monitor and control the FET, fuel cell, battery, and motor. The MP5SD6, equipped with a dedicated silencer as standard, is a highly quiet model, making it a popular standard electric gun.

The silencer is made of machined aluminum with a non-slip textured finish, and the uniquely designed handguard is also reproduced using a resin material similar to rubber, reminiscent of a real gun.

• Dedicated upper receiver with SD engraving and welded reproduction
• Adopts a resin handguard that resembles rubber, reminiscent of a real gun
• Like the real gun, the cocking handle is at a different angle from the A5.
• The dedicated silencer is made of machined aluminum and features a textured finish that resembles a real gun.
• Built-in sound-absorbing material reduces shooting noise
• When the silencer is removed, various muzzle options can be attached with a 14mm reverse thread.
• Equipped with "M SYSTEM" monitoring and control system using a dedicated IC
• Newly designed next-generation radio box
• Selector through type
• Strong recoil shock due to the weight of about 300g
• Semi-full and 3-burst compatible
• Equipped with an auto-stop mechanism, it operates just like the real thing.
• Mainframe made with a lot of metal
• The grip, butt plate, and other plastic parts are made of reinforced nylon, which is similar to the material used in real guns.
• Strengthened mounting rigidity of slide stock and handguard
• Reinforced cocking handle that can withstand "HK Slap"
• The rear sight is a drum type: it can be adjusted left and right as well as up and down.
• The paint is made using powder coating to recreate a texture close to the real thing.
• Weight: Approx. 3180g (with empty magazine and battery not included)
• Compatible with Tokyo Marui genuine Li-Po batteries (to be released at a later date)

Key Features

Shoot & Recoil engine

• When the trigger is pulled, a 300g weight that simulates a bolt is activated, causing a powerful recoil force to be felt throughout the body. The gun also features an auto-stop system that stops firing when the magazine is empty, and a bolt release mechanism that can be released by pulling the bolt handle. This model is designed to be as realistic as possible in terms of operation and operability.

Reproduce 3 bursts

• In addition to semi-auto and full-auto firing, it also perfectly reproduces the triple burst firing that fires three shots when the trigger is pulled. The selector, which can be operated from either the left or right side, is linked with an axis that penetrates the gearbox, achieving smooth rotation and a solid click feeling.

Equipped with FET

• Instead of a conventional mechanical switch, it uses an FET (electronic switch), which reduces current loss at the contact points compared to a mechanical switch, improving the response time from pulling the trigger to firing the BB bullet.

M-SYSTEM

• The newly developed "M-SYSTEM" uses a microcontroller unit (MCU) to comprehensively monitor and control the FET, FC (Fire Control), battery, and motor. It monitors information from seven sensors and various voltages to switch shooting modes and control motor rotation, while also providing safety by detecting damage or malfunctions in any part and stopping operation.

Pursuing the reproduction of the appearance

• Many metal parts, including the upper receiver, are powder coated to resemble the real thing. The cocking lever is at a different angle than the A5, just like the real gun.

Increased rigidity in various areas

• The cocking handle's component configuration has been revised and reinforced nylon resin has been adopted, allowing for the "HK slap" technique, in which the locked cocking lever is slapped back into place. The retractable stock has also been redesigned to improve both realism and rigidity.

Adjustable rear sight

• The drum-type rear sight can be adjusted to the vertical position of the bullet's impact using the included rear sight adjustment tool, and to the horizontal position using a Phillips head screwdriver (*), just like the real thing. *A Phillips head screwdriver is not included. Please prepare one separately.

A realistic press-finished magazine

• It holds 72 rounds. It comes with a steel-pressed outer case magazine with fully welded seams, just like the real thing. This magazine is not compatible with other MP5 models, such as the standard type electric gun.

Total length 600/760 mm
Barrel length: 229 mm (inner barrel length)
Weight: 3,180 g (including empty magazine and battery)
Bullet: 6mm BB (0.2-0.25g)
Power source: 8.4V NiMH 1300mAh Mini S battery / Tokyo Marui genuine LiPo battery (to be released at a later date)
Magazine capacity: 72 rounds Model name: MP5 SD6
Type: Submachine gun/PDW

Package Contents
MP5 SD6 body, magazine (72 rounds), rear sight adjustment tool, NiMH Mini-S battery cover, MS/Li-Po standard type battery cover, coupler cover, protective cap, handling instructions, hex wrench, charger, charging rod, cleaning rod, BB bullets (0.2g/200 rounds), etc.

Package size: 730mm wide x 320mm long x 110mm thick