Pre-orders are now open for the highly anticipated "SPECNA ARMS" items!
[FLEX Series]
An entry-level model specializing in lightweight design and mobility, featuring quick aiming and excellent handling.
The Flex ETU G2 BLDC series offers a practical setup and high operational performance in an electric gun, all at an attractive price point. Equipped with the light-sensor-controlled "HAL ETU™" electronic trigger and the high-performance "Dark Matter™" brushless motor as standard, it achieves sharp response and stable operation.
Additionally, it features a rotary TDC Magnus™ hop-up chamber, 8mm slide bearings + steel gears, and a quick-change spring system. With an M-LOK handguard and receiver made of nylon fiber reinforced polymer, it is lightweight and easy to handle, offering a well-balanced firearm suitable for a wide range of field uses right out of the box.
【Features】
・Dark Matter™ brushless motor standard
・Electronic trigger control by HAL ETU
・Nylon fiber reinforced polymer M-LOK handguard
・6.03mm inner barrel
・Rotary TDC Magnus hop-up chamber
・16:1 CNC gears
・8mm slide bearings
・Quick-change spring system
・Full-auto / Burst / Semi-auto compatible
・T-type connector
・Includes 2x 100-round spring magazines
■Product Specifications:
・Handguard Type: M-LOK
・Inner Barrel Diameter: 6.03mm
・Inner Barrel Material: Brass
・Inner Barrel Length: 310mm
・Chamber Type: Rotary TDC Magnus™
・Overall Length: 840mm
・Weight: 2150g
・Magazine Type: 100-round spring magazine
・Handguard Material: Nylon fiber reinforced polymer
・Receiver Material: Nylon fiber reinforced polymer
・Barrel Thread: 14mm counter-clockwise
・Quick Change Spring System installed
・Internal Specifications: 8mm slide bearings, steel gears, polycarbonate polymer piston
・Firing Modes: Full auto / Programmed burst / Semi-auto
・Electronic Trigger: HAL installed
・Connector Type: T-type connector
・Compatible Battery: EVO LiPo battery 7.4V/1200mAh (T-type connector) for stock pipe
・Motor: Dark Matter™
・Gearbox: Gearbox V2
Both internal and external specifications prioritize practicality, featuring a rotary TDC Magnus™ hop-up chamber, 8mm slide bearings + steel gears, and a quick-change spring system.
The M-LOK handguard and receiver, made of nylon fiber reinforced polymer, ensure lightweight handling and ease of use. This is a well-balanced rifle, suitable for a wide range of field uses right out of the box.
■Initial Startup Procedure
1. Set the selector to "SAFE."
2. Connect the battery. After connecting, there will be "3 beeps." Approximately 3 seconds later, there will be "1 high-pitched beep."
3. Pull and hold the trigger for about 5 seconds. If you hear "2 high-pitched beeps," the setup is complete.
■Equipped with HAL ETU™ Electronic Control System
The trigger incorporates "HAL ETU™," an electronic control system based on an optical sensor. This achieves both sharp, excellent response and stable operational feel.
【Main Functions of HAL ETU™】
・Full-auto / Semi-auto / Programmed Burst Firing
・Trigger Sensitivity Setting
・Pre-cocking Setting
・Active Braking Setting
■Dark Matter™ Motor Installed
The standard equipped high-performance "Dark Matter™" brushless motor achieves excellent performance with high torque and low power consumption.
■Setting Specna Arms electronic trigger "HAL"
Quickly switch the selector switch from "AUTO" to "SEMI" twice, then set it to "SEMI" to enter program mode.
In program mode, first select each setting item. Pull the trigger once each time the selector switch is in "SEMI" to hear a beep, allowing you to switch between setting items.
【Setting Items】
1 Beep - Full-Auto Setting
2 Beeps - Semi-Auto Setting
3 Beeps - Trigger Setting
4 Beeps - Pre-cocking Setting
5 Beeps - Active Braking Setting
With the desired setting item selected, switch the selector lever to "AUTO" to enter the detailed setting mode for that item.
Hold the trigger for 3 seconds while the selector lever is in "AUTO" to save the program settings.
【Details for Each Item】
・Full-Auto Setting
1 Beep - Full-Auto
2 Beeps - Semi-Auto
3 Beeps - 3-Round Burst
4 Beeps - 5-Round Burst
・Semi-Auto Setting
1 Beep - Semi-Auto Only
2 Beeps - Binary
3 Beeps - AUG Mode
4 Beeps - Sniper Mode
・Trigger Setting
1 Beep - 20%
2 Beeps - 40%
3 Beeps - 60%
4 Beeps - 80%
5 Beeps - 100%
・Pre-cocking Setting
1 Beep - LEVEL 1
2 Beeps - LEVEL 2
3 Beeps - LEVEL 3
4 Beeps - LEVEL 4
5 Beeps - LEVEL 5
6 Beeps - LEVEL 6
・Active Braking Setting
1 Beep - ON
2 Beeps - OFF
Hold down the trigger for 3 seconds with the selector lever in "AUTO" to save and exit the program settings.
・Binary: One shot when the trigger is pulled, one shot when released.
・AUG: Semi-auto when the trigger is pulled shallowly, full-auto when pulled deeply.
・Sniper: Pull the trigger once, and after a beep sounds, pull the trigger again to fire.
※In normal state, please use pre-cocking settings from LEVEL 1 to 3. LEVEL 4 to 6 are for advanced custom configurations.
※Active braking is set to "ON" by default. If you are not performing any customizations, there is no need to set it to "OFF," so please use it as is.
■Included Accessories
・Spring Magazine x2
・Cleaning Rod
・Hex Wrench
・Small Tamiya - Deans Adapter
・BB Speedloader
・M90 Additional Spring
■Note:
※Product specifications are subject to change without notice.
※This product is for ages 18 and over. Individuals under 18 years of age are not permitted to use or purchase this product.
※Customers making a purchase may be asked by local authorities or police to provide identification. In such cases, please comply with the request and provide your identification.
