[Specna Arms] SA-F05 FLEX ETU G2 BLDC AEG Rifle / Ages 18+ (Scheduled for late July 2026 release - Pre-order)

Pre-orders for the much-talked-about "SPECNA ARMS" items have begun!

What is SPECNA ARMS? Features and Series Explanation

[FLEX Series]
An entry-level model specializing in lightweight and mobility, characterized by fast aiming and high maneuverability.

The Flex ETU G2 BLDC series is an electric gun that achieves practical equipment and high operational performance at an attractive price. It comes standard with the photo-sensor controlled electronic trigger "HAL ETU™" and the high-performance brushless motor "Dark Matter™," providing sharp response and stable operation. Furthermore, it features a rotary TDC Magnus™ hop-up chamber, 8mm slide bearings + steel gears, and a quick-change spring system. The M-LOK handguard and receiver made of nylon fiber-reinforced polymer make it lightweight and easy to handle, offering a well-balanced firearm suitable for a wide range of field uses right out of the box.

【Features】
・Dark Matter™ brushless motor standard
・HAL ETU electronic trigger control
・Nylon fiber reinforced polymer M-LOK handguard
・6.03mm inner barrel
・Rotary TDC Magnus hop-up chamber
・16:1 CNC gears
・8mm slide bearings
・Quick change spring system
・Full auto/burst/semi-auto compatible
・ T-connector adopted
・Comes with 2 x 125-round spring magazines

■Product Specifications:
・Handguard type: M-LOK
・Inner barrel diameter: 6.03mm
・Inner barrel material: Brass
・Inner barrel length: 320mm
・Chamber type: Rotary TDC Magnus™
・Overall length: 760mm～850mm
・Weight: 2270g
・Quick spring change system included
・Magazine type: 125-round spring magazine
・Handguard material: Nylon fiber reinforced polymer
・Receiver material: Nylon fiber reinforced polymer
・Barrel thread: 14mm counter-clockwise
・Internal specifications: 8mm slide bearings, steel gears, polycarbonate polymer piston
・Firing modes: Full auto / programmed burst / semi-auto
・Electronic trigger: HAL equipped
・Connector type: T-connector
・Compatible battery: EVO LiPo battery 7.4V/1200mAh (stock pipe-in, T-connector)
・Motor: Dark Matter™
・Gearbox: Gearbox V2

■Initial Start-up Method
1. Set the selector to "SAFE."
2. Connect the battery. After connecting, there will be "3" beeps. Approximately 3 seconds later, there will be "1" high-pitched beep.
3. Pull and hold the trigger for about 5 seconds. If there are "2" high-pitched beeps, the setup is complete.

■Equipped with HAL ETU™ electronic control system
The trigger adopts "HAL ETU™," which performs electronic control using an optical sensor. It achieves both sharp, excellent response and stable operation.

【Main functions of HAL ETU™】
・Full auto / semi-auto / programmed burst firing
・Trigger sensitivity setting
・Pre-cocking setting
・Active braking setting

■Equipped with Dark Matter™ Motor

Equipped with a high-performance brushless motor "Dark Matter™" as standard, it achieves excellent performance with high torque and low power consumption.

■Setting Specna Arms Electronic Trigger "HAL"
Quickly switch the selector switch from "AUTO" to "SEMI" twice and set it to "SEMI" to enter programming mode.
In programming mode, first select each setting item. When the selector switch is kept at "SEMI" and the trigger is pulled one by one, a beep sound will be heard, allowing you to switch between setting items.

【Setting Items】
Beep × 1 - Full-auto setting
Beep × 2 - Semi-auto setting
Beep × 3 - Trigger setting
Beep × 4 - Pre-cocking setting
Beep × 5 - Active braking setting

With the desired setting item selected, switch the selector lever to "AUTO" to enter the detailed setting mode for each item.
Hold down the trigger for 3 seconds while the selector lever is in "AUTO" to save the program settings.

【Details for each item】
・Full-auto setting
Beep × 1 - Full Auto
Beep × 2 - Semi Auto
Beep × 3 - 3-round burst
Beep × 4 - 5-round burst

・Semi-auto setting
Beep × 1 - Semi-auto only
Beep × 2 - Binary
Beep × 3 - AUG mode
Beep × 4 - Sniper mode

・Trigger setting
Beep × 1 - 20%
Beep × 2 - 40%
Beep × 3 - 60%
Beep × 4 - 80%
Beep × 5 - 100%

・Pre-cocking setting
Beep × 1 - LEVEL 1
Beep × 2 - LEVEL 2
Beep × 3 - LEVEL 3
Beep × 4 - LEVEL 4
Beep × 5 - LEVEL 5
Beep × 6 - LEVEL 6

・Active braking setting
Beep × 1 - ON
Beep × 2 - OFF

Hold down the trigger for 3 seconds while the selector lever is in "AUTO" to save and exit the program settings.

・Binary: One shot when the trigger is pulled, one shot when released
・AUG: Semi-auto when the trigger is pulled lightly, full-auto when pulled deeply
・Sniper: Pull the trigger once, and after a beep sound, pull the trigger again to fire

※For normal use, please use pre-cocking settings LEVEL 1-3. Levels 4-6 are for advanced custom modifications.
※Active braking is initially set to "ON." If you do not perform any customs, there is no need to set it to "OFF," so please use it as is.

■Accessories
・Spring magazines × 2
・Cleaning rod
・Hex wrench
・Small Tamiya - Deans adapter
・BB speed loader
・M90 additional spring

■Caution:
※Product specifications are subject to change without notice.
※This product is for individuals "18 years and older." Individuals under 18 cannot use or purchase this product.
※Customers who purchase may be asked by local authorities or police departments to present identification. In such cases, please comply with the request and provide your identification.