[MANCRAFT] HPA Unit for PDIK V3 (Unit Only)

HPA unit for PDIK V3 (unit only)
Mancraft co2 unit.

This product is an HPA conversion unit for Ver.3 standard electric guns.
The power source is CO2 gas, so it can be used regardless of weather conditions.
※(This unit can only fire semi-auto and cannot fire full auto)
*It can be installed in the Ver. 3 gearbox for standard electric guns, allowing you to easily convert your electric gun to HPA (CO2).
(Some modification may be required for installation.)
*If you use a radio box from a foreign manufacturer, significant modifications may be required for installation.
The nozzle included with the unit can be replaced with a nozzle for standard electric guns. Please use the nozzle of each manufacturer according to your settings.
*Fixed nozzles and thicker nozzles may not be usable.
The built-in nozzle has a total length of 21.48 mm.
The trigger area can be used with standard electric guns.
The trigger feeling is excellent because the valve is pressed directly.
*There will be a gap of 0.5mm to 1.2mm between the trigger and the release valve, so if this bothers you, please use a trigger spring.
*The units sold by our company are sold as domestic specifications (JPVer).
*This product requires knowledge of disassembly and installation and is intended for advanced users.
*When adjusting, please use it in accordance with the legal muzzle velocity of less than 0.98j.
*When assembling, be sure to use the selector plate and safety lever.
*This unit (JPVer) has been confirmed to work with the Sun Project 0.55MPa regulator, which is available in Japan.
If you are using a fixed pressure reducing regulator, please purchase a return spring separately.
*Low pressure springs will be produced in the future, so please wait until they are on sale.

Accessories: Unit body, gas volume adjustment spacer x 1