• Shipping fee is 880 yen for any number of items *Excluding Okinawa and remote islands
  • Business hours: Weekdays 10:00-18:00
SUN PROJECT No. 17500 Green Gas Regulator with Meter for Airsoft Guns, Starter Set, Coil Hose
  • SKU: 4545081102886

SUN PROJECT No. 17500 Green Gas Regulator with Meter for Airsoft Guns, Starter Set, Coil Hose

$111.00 $138.00
Tax included. Shipping calculated at checkout.
Product Description

This external carbon dioxide (CO2) power system has a lower environmental impact than standard refrigerant gas. Its pressure changes little with temperature, maintaining stable power even in low-temperature environments or when the temperature drops due to rapid fire. It's also the most compact external-source system available. Due to its characteristics, it's a popular system in the speed shooting world, and with the increase in tatami room shooters due to the stay-at-home lifestyle, it's now experiencing a quiet boom.

Get started with the Green Gas System!
This set gives you everything you need to get started with your green gas system.

Set contents
●Pressure regulator Green gas regulator 1 unit ↓
●1 bottle of green gas ↓
●Cylinder stand 1 piece Regulator set
1 x 6mm coil hose (SP-12-6)
● Coupler plug set 1 piece (SP-23-)

*The coupler plug set will vary depending on the gun manufacturer and gun you are using. (There are three types.)
Please check the screw diameter of the injection valve of the gun you wish to use before ordering.


Coupler Plug SET Ver. II
No.1 (KSC, Marushin, etc.) M5×P0.5
No.2 (Marui, Maruzen, etc.) M4.5×P0.5
No.3 (WA, etc.) M5×P0.8



Regulator (pressure regulator) for Green Gas 74g
With discharge pressure meter (15mm acrylic cap)

The upper opening/closing knob allows you to adjust the discharge pressure from 0 to the maximum set pressure.
You can adjust the pressure while checking it visually with the meter.
*The meter displays up to 1 MPa, but this is to prevent damage to the meter, and pressure adjustment is limited to within the maximum pressure range.

Size: W60mm x D32mm x H74mm (including accessories) Weight: 245g
Maximum discharge pressure: 0.5MPa (±0.05MPa)
6mm hose joint included

About the Green Gas System
The Green Gas System is a product that supplies stable external pressure to recreational gas guns.
Unlike freon gas, there is no pressure drop due to temperature drops in winter, and the gas temperature drop that occurs during continuous firing does not occur.
Since the pressure drop due to dipping is significantly less, it can be used with stable gas pressure throughout the year.
The regulator has a maximum discharge pressure setting, and the pressure cannot be changed beyond that setting.
If abnormal pressure occurs inside the regulator due to the inflow of raw gas, the safety valve will operate and
Release the internal pressure.

■Connector installation
To use the Green Gas System, you need to attach a pressure-resistant hose to the gas gun.
What you need is a connector.
① Remove the injection valve from the gas gun (mainly the magazine). You can also use a commercially available flathead screwdriver to remove it.
It is possible to remove it, but it is very convenient to use a valve wrench.
②Attach the connector plug to the part where the injection valve was removed. At this time, tighten it firmly with a tool.
Do not tighten it too much, just make sure it stops lightly with your hand.

■Precautions for use
●Never use any gas cylinders other than our genuine green gas.
●Never modify, alter or repair the regulator yourself.
After connecting to the gun, please check the bullet speed before use. Always measure at the regulator's maximum discharge pressure.
Please go.
When using carbon dioxide gas cartridges, please use them correctly according to the instructions in the equipment's instruction manual.
Please handle it.
●Avoid direct sunlight and do not place in places where the temperature exceeds 40°C.
●Even if a small amount of gas leaks out when installing, just screw it in all the way.
●After installation, do not remove from the appliance until all the gas has been discharged.
●Please use within the temperature range of 0 to 40°C.
●If white frost forms on the surface, do not touch it directly with your bare hands. Instead, wrap gloves or a cloth around it to remove it.
●After confirming that the seal of the used cartridge is punctured, dispose of it as non-combustible waste.
Also, do not throw it into fire.
●Please store in a safe place out of reach of children.
 
[Ages 18 and over] [Not available for airmail]

Product code: 4545081102879 (No.1)
4545081102886 (No.2)
4545081102893 (No.3)

Recently viewed items

BACK TO TOP