[da Vinci Custom] 08 Guren "1" Inner Barrel for VSR-10

*Please note that this item is made to order and will take approximately 1-2 weeks to be shipped after your order is placed.

08 Guren 1 Inner Barrel (please select the type and length)
Inner diameter 6.08mm
Outer diameter 8.55mm
HV500 coated (hardened, rust-proof, wear-resistant, and slip-resistant)

303mm for VSR-10 G-SPEC
430mm for VSR-10 PRO SNIPER
500mm for L96 AWS

Introducing the Guren (Guren) low-priced inner barrel series, featuring an inner diameter of 6.08mm, the same as the stock, and coated with the "HV500 Coat" for excellent wear resistance, stain resistance, and maintaining a beautiful surface!
The Guren "1" was developed with the aim of releasing a barrel at the lowest possible price.
Because we cannot compromise on materials and coatings, we limit the processing methods and areas used to achieve low costs. All muzzle ends are chamfered to ensure a barrel that does not clog. This process shortens processing time and reduces the amount of metal waste generated during processing, lowering the product's reject rate and allowing us to set lower prices.

The inner diameter of 6.08mm is the same as the original, making it ideal for replacing cheap barrels made overseas. <br>The inner diameter is 6.08mm, the same diameter as the original, making it ideal for replacing overseas guns equipped with cheap barrels or for suppressing excessive power output.

*Toy guns are made up of many parts. Depending on the combination of parts, performance may not be achieved.
Barrels for the VSR-10/L96 are available in G-SPEC size (303mm), Pro Sniper size (430mm), and L96 AWS size (500mm). They are chamfered at 45 degrees to prevent damage to the hop-up seal.

Guren's inspection standards include three internal diameter inspection points: "after polishing," "before coating," and "after coating."
In particular, we physically check to see if any burrs generated during processing have affected the inner diameter.
The polishing is then checked again by the "human eye" of a select few craftsmen in charge of polishing.
We put in time and effort to provide a thorough user experience.
Regarding roughness of the inner and outer diameters due to the material, and patterns that occur during processing (cutter marks, blade marks, etc.) that do not affect use,
After going through the above checks, the craftsman has given his permission, so please use it with confidence.