[C.A.T.] Versatile EVO-10 AR

～Includes a 60-day product warranty after purchase～

The airsoft brand C.A.T. AIRSOFT, fully supervised by SPARK.

The first in the Versatile EVO series!
Powerful right out of the box

Equipped with an automatic pre-cocking system. The most worry-free model in the C.A.T. lineup.

With conventional mechanical C.A.T. series models, it was necessary to adjust the MAP sector gear to match the battery used.
While this was favored by expert users who enjoyed the ability to perform manual, personalized adjustments, it was also a factor that made the product seem difficult to beginners or those who did not require such precise tuning.

The Versatile EVO is equipped with the "C.A.T. EVO ETU." By shipping with the pre-cocking and active brake settings already configured, we aimed to create a product that aligns with the concept of being "powerful right out of the box."

As with our existing products, each unit undergoes careful inspection at our 30m shooting range, where actual firing tests are conducted to ensure accuracy and operational standards are met. We continue to maintain a comprehensive supply of replacement parts and manufacturer support.

■ Automatic Pre-cocking System
Leave pre-cocking to the computer and sensors.
(Pre-cocking is a mechanism that allows the gun to fire the moment the trigger is pulled. This is now set automatically by the "C.A.T. EVO ETU" control unit.)

Conventional mechanical variable pre-cocking mechanisms were designed for owners to adjust themselves according to their battery and shooting style.

If tuned precisely, it can yield extremely high and stable performance. However, that was a level of performance only accessible to those who knew how to adjust it.

While we received high praise for the out-of-the-box accuracy and response, we definitely heard feedback that "adjusting the pre-cocking is strict and difficult."

The Versatile EVO series was created to address that challenge head-on, with the goal of being a rifle we can confidently recommend even to those picking up an electric gun for the first time.

▶ Conventional Mechanical Series
The amount of "manually adjusted" pre-cocking is dialed in by the owner using the MAP sector gear to match their battery and shooting style.

▶Versatile EVO Series
"Handled by computers and sensors." Both pre-cocking and active braking are controlled by the C.A.T. EVO ETU. It is less affected by battery level or wear, providing a consistent feel until the very last shot.

• Configured at the factory. Ready to use as-is.
• Adjustable once you're used to it. You can change shooting modes, trigger sensitivity, and pre-cocking levels, or turn them off.

■ 7 out of 10 shots land headshots at 30 meters

In our company shooting range, we have confirmed that this model achieves 7 or more headshots out of 10 rounds on a human-sized target at 30 meters. Since the gun fires the instant the trigger is pulled, you can maintain your aim and hit moving targets.

This accuracy is supported by SPARK's original HOP chamber, while the response is powered by the "INAZUMA" motor, a Japanese-made motor designed specifically for the Japanese usage environment.

※ These figures are based on firing tests conducted at our company shooting range. Results may vary depending on usage conditions.

■1,900g: The lightest in the 10-inch C.A.T. class

Every part—including the handguard, receiver, and flash hider—was reviewed to keep the weight at 1,900g. It is less tiring to hold for long periods and makes handling easier.

With the stock folded, the total length is 555mm, making it easy to fit into standard gun cases.

※ "Lightest" refers to a comparison with our company's products as of September 2026. Weight is based on our company standard, excluding iron sights, magazines, and batteries.

Product Features

〈Lightweight〉

• Lightweight AR Flash Hider
  Lightened right to the tip. It features a 14mm counter-clockwise thread, allowing for the attachment of suppressors or tracers.
  Attaching/Detaching → The hider is secured with a set screw. Please remove the set screw completely before attempting to rotate it for removal.

• Box Flute Outer Barrel (11.5 inches)
  A shape designed to ensure rigidity while being lightened with fluting.
  
  
• LW Handguard 10-inch
  A newly developed handguard with bold lightening cuts.
  
  
• PA66 / GF30 Resin Receiver
  Molded from light yet strong resin.
  
  
• Trellis Folding Stock
  Folds down to a total length of 555mm. The battery is stored inside the cheek pad.
  

〈Shooting Performance〉

• SPARK Original HOP Chamber
  An original chamber that achieves higher accuracy than conventional products.
  
  
• Custom Motor "INAZUMA"
  SPARK's original Japanese-made motor. Features a cycle and torque tailored to Japanese usage environments.
  
  
• Flip-up Iron Sights
  Can be folded down when an optic is mounted. Serves as a backup if your optic runs out of battery or fails.
  
  

〈Usability〉

• Pre-cocking Temporary Release Function
  

  You can release the pre-cocking by pushing the lever at the base of the grip using a thin tool like the included hex wrench.
  ※ The piston will move forward, so please ensure that there is no BB loaded in the chamber.
  
  

• Dummy Bolt Cover Lock Function
  Pulling the charging handle all the way back locks the cover, making it easier to adjust the HOP-UP dial.
  
  
• Compact Charging Handle
  On an electric gun, this part is only pulled to adjust the HOP-UP. We made it as small as possible to prevent it from snagging on gear or getting caught on barricades during gameplay.
  
  
• QD Sling Swivel Included
  Allows for one-touch attachment and detachment of slings.
  

〈Customization〉

• Interchangeable Magazine Housing
  Comes with a large AR custom housing that is easy to grip. By swapping it with sold-separately AK, PCC, or SMG (MP5) housings, you can expand the types of magazines you can use.
  
• Adjustable Stroke Trigger
  The trigger travel can be adjusted using the screw at the base. Along with trigger sensitivity and reset position settings, you can dial in your preferred feel.
  
  
• C.A.T. EVO ETU
  The control unit that manages all operations. While it comes pre-configured, you can change the shooting mode and trigger sensitivity yourself at any time.
  

【Specifications】

【Accessories】

• Main unit
• Magazine (1 pc)
• AR custom housing
• Iron sights
• Hex wrench
• Cleaning rod
• Instruction manual

〈EVO ETU Setting Items〉
You can use the product with the factory settings. If you wish to change them, you can customize the following items yourself. Please refer to the instruction manual (included printed copy / web version) for setting procedures.

【Notes】

• This product is intended for users aged 18 and older; those under 18 cannot purchase it.
• Overseas products may have scratches or other marks from the factory even when brand new. Individual differences in color may also occur, which are considered product specifications.
• Specifications and accessory configurations are subject to change without notice. In some cases, we may provide products that have been repacked or have had their original boxes modified/removed due to damage.
• Product warranty is subject to the terms and conditions described in the included warranty certificate.