LayLax Compact Air Seal Chamber Gasket (Soft) for Electric Handguns and Compact Machine Guns

This is a chamber packing that can be used for various types of electric compact machine guns and electric handguns.
The air leakage prevention ribs on the outside of the packing are set to a moderate tightness, ensuring high airtightness while preventing distortion during assembly, resulting in stable performance.

■Quantity: 1 piece

■Color: Purple

■Compatible models:
Tokyo Marui Electric Gun Handgun Type Series Glock 18C
・M93R
・H&K USP
・M9A1
・Hi-CAPA E Government Model (Hi-CAPA E)

Tokyo Marui Electric Compact Machine Gun Series MP7A1 Black/Tan Color Model Scorpion Mod M/Mod D
・Scorpion Vz.61
・Mac 10

Check compatible devices here

If the "Inner Barrel (Inside Barrel)" and "EP Hop-Up Chamber" in the parts list of your airsoft gun's instruction manual are marked "Ver.2," this product cannot be used alone. Please use it in conjunction with the corresponding inner barrel, sold separately.

■Note:
●When using, please apply an appropriate amount of silicone oil or similar to the oil to soak in. If you use it without fully degreasing it, it may cause clogging.
●Excessive use of silicone oil etc. will cause variations in bullet speed and accuracy. If you apply too much, remove the excess silicone oil etc. with our barrel refresher, then fire 60 to 70 BB bullets until the trajectory stabilizes.
●The chamber packing is a consumable item. We recommend replacing it after extended use or if you notice a decline in performance.

*After customizing, be sure to check the joule value and bullet speed.
Due to the revision of the Swords and Firearms Control Law, anyone exceeding the regulated value of 0.989 joules will be subject to punishment.
In addition, measurement values ​​will inevitably vary depending on the season, time of day, HOP adjustment, gun characteristics, etc.
Please use the air gun with a joule value that allows for some leeway.