Products (9701)

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

RETRO ARMS CNC Gears PandoRA - Supports RATIO 16:1 Special sector gear with adjustable tappet pins. It has a structure that allows you to place the screw-in tappet pin at...

RETRO ARMS CNC Gears PandoRA - Supports RATIO 20:1 Special sector gear with adjustable tappet pins. It has a structure that allows you to place the screw-in tappet pin at...

RETRO ARMS CNC Gears PandoRA - Compatible with SR25 19 tooth RATIO 20:1 Special sector gear with adjustable tappet pins. A long piston with 19 teeth is required. It has...

Dramatically improved strength and precision compared to the original zinc gearbox The combined weight of the screws and spring guide is approximately 178g, which also contributes to weight reduction. In...

The integrated chamber V2 gearbox has been completely renewed as the CNC Split Gearbox V2 with int. Hop Up Chamber ULTRA (8mm) - QSC! Improvements Improved cylinder holding method Piston...

Made entirely from EN AW7075-T651 ultra-super duralumin High precision, high strength gearbox. The strength and precision are dramatically improved compared to the original zinc gearbox. In addition, each part is...

This tappet plate is made entirely by cutting from a block of POM (Duracon). Compared to injection molding using a mold, the nozzle holder and the main body are at...

The company's CNC 3K-carbon Outer Barrel AR15 and CNC Hop Up Chamber AR15 ULTRA This is a dedicated long wedge clamp that is required when using in combination. CNC 3K-carbon...

This is a custom trigger for Tokyo Marui standard AK series electric guns (V3 gearbox). It does not have adjustable trigger pull. The material is EN AW7075, and the surface...

Tokyo Marui Standard Electric Gun AK Series (V3 Gearbox) This is a custom trigger that can be used. There are no adjustment functions such as pull distance. The material is...

This is a trigger safety lever that can be used with Tokyo Marui V2 standard gearboxes and RETRO ARMS V2 standard gearboxes. The shaft is machined from EN AW7075 T651,...

This is a nut part for mounting the inner barrel exclusively for the company's CNC Hop Up Chamber AR15 ULTRA . Great for spare parts or custom bases.

RETRO ARMS CNC Split Gearbox V2 (8mm) - Upper gearbox compatible with QSC 2025. Comes with a set of screws and a spring guide. *Note* Due to different structure, it...

Hop-up packing for standard AEG. Made of NBR (nitrile rubber). The lineup includes Shore A55 (soft) and Shore A70 (hard) in terms of hardness. ---------------------------------------------------------------------------------------------- It is a protrusion type...

This is a specially shaped hop-up packing for the company's CNC Hop Up Chamber AR15 ULTRA . The material is nitrile rubber and the hardness is Shore A 55. This...

This is a spring for the charging handle of a standard AR15 series electric gun. Please keep this as a spare in case of damage or loss.

Place it between the barrel flange and handguard of various AR systems, Shims for adjusting the angle of the handguard. Made of stainless steel, 0.2mm thick, and comes in a...

Stainless steel gear shim. The size is inner diameter Φ4mm, outer diameter Φ8mm, thickness 0.1mm, and one package contains 20 pieces. It can be used with the company's CNC Gears...

Stainless steel shim set with an inner diameter of 3mm and an outer diameter of 6mm. The set contains 20 sheets each of thicknesses 0.5mm, 0.2mm, and 0.1mm, for a...

Compatible with Tokyo Marui next generation electric gun standard springs (outer diameter Φ14mm) This is a custom spring with an outer diameter of Φ13.75mm. The company Piston 14.5 steel teeth...

Nylon + fiber injection molded body with spring steel (56SiCr7) rack gear This is a high-strength piston that combines Compatible with Φ15mm standard electric gun springs, The weight is 16.27g....