Products (6564)

Compliant with Tokyo Marui standard spring (outer diameter Φ15mm) for electric guns. This is a custom spring with an outer diameter of 14.5mm. It can be used for a wide...

Steel pivot pin. By tightening the screw (T8 Torx), the central inclined part protrudes, eliminating play between the upper and lower receivers. This prevents the pin from loosening. ---------------------------------------------------------------------------------------------- The...

This is a receiver pin for the standard AR-15 series electric gun. The screws have larger heads on both ends to prevent them from falling out. The screws are T6...

Resin barrel clip. Can be used with various AK chambers.

Resin barrel clip. Can be used with various M4 chambers.

RETRO ARMS has developed two revolutionary designs for the standard AEG AR15. This is a custom outer barrel. The front and rear bases are made of EN-AW7075-T651 machined and anodized....

RETRO ARMS piston head, Aluminum It is made of high strength A7075, but the weight of the piston head and O-ring is 6.4g. Including the thrust bearings and fixing screws,...

Tokyo Marui standard electric gun compatible with AR15/M4 receivers This is an ambidextrous custom charging handle made by EN AW7075 T651. Ejection port interlocking parts are not included, so please...

Based on the company's CNC Low Profile Bushing 8mm / 3mm This is a specially shaped 90MnCrV8 tool steel machined bearing with anti-rotation protrusions. One package contains 6 pieces. Compatible...

This is a high-strength, thin bearing machined from 90MnCrV8 tool steel. The compatible gear shaft is Φ3mm, and the bearing hole sizes are 6mm, 7mm, 8mm, and 9mm. One package...

This is a high-strength, thin bearing machined from 90MnCrV8 tool steel. The compatible gear shaft is Φ3mm, and the bearing hole sizes are 6mm, 7mm, 8mm, and 9mm. One package...

This is an air seal nozzle made from machined duralumin. There is an O-ring inside for airtightness. A general-purpose standard airtight O-ring (SS-055) is used, making repairs easy. The nozzle...

This is a CNC machined reinforced piston for the Tokyo Marui AA-12. The second rack gear is fully cut from the beginning, and the third is half cut. It has...

This product is made with a thorough understanding of the structure of electric guns, This is a product for advanced users that allows for detailed fine adjustments and fitting. This...

Dramatically improved strength and precision compared to the original zinc gearbox The combined weight of the screws and spring guide is approximately 178g, which also contributes to weight reduction. In...

This is a custom trigger for Tokyo Marui standard AK series electric guns (V3 gearbox). It does not have adjustable trigger pull. The material is EN AW7075, and the surface...

Tokyo Marui Standard Electric Gun AK Series (V3 Gearbox) This is a custom trigger that can be used. There are no adjustment functions such as pull distance. The material is...

Place it between the barrel flange and handguard of various AR systems, Shims for adjusting the angle of the handguard. Made of stainless steel, 0.2mm thick, and comes in a...

Stainless steel shim set with an inner diameter of 3mm and an outer diameter of 6mm. The set contains 20 sheets each of thicknesses 0.5mm, 0.2mm, and 0.1mm, for a...

Compatible with Tokyo Marui next generation electric gun standard springs (outer diameter Φ14mm) This is a custom spring with an outer diameter of Φ13.75mm. The company Piston 14.5 steel teeth...

Nylon + fiber injection molded body with spring steel (56SiCr7) rack gear This is a high-strength piston that combines Compatible with Φ15mm standard electric gun springs, The weight is 16.27g....

This is a high-strength piston that combines a nylon + fiber injection molded body with a rack gear made of spring steel (56SiCr7). Compatible with Φ15mm standard electric gun springs,...

Nylon + fiber injection molded body with spring steel (56SiCr7) rack gear This is a high-strength piston that combines Compatible with Φ15mm standard electric gun springs, The weight is 16.97g....

19T piston for various long gearboxes. The rack gear is made of spring steel (56SiCr7) and is fully machined and salt hardened. The second rack gear is fully cut from...