[PDI] TAC Receiver for Tokyo Marui VSR-10 Bore Up

New design of BURE UP receiver!

While maintaining the performance of the traditional BORE UP receiver, the new design gives it a tactical look and is also lightweight.

Made from aluminum alloy, it features beautiful surface treatment achieved through full CNC machining.
The smoothness that cannot be reproduced through production using molds results in a finish that is comparable to products made by custom parts manufacturers for real guns.
The smooth curves achieved through careful milling further highlight the matte texture of the black anodized aluminum, giving the finish a more solid feel.

Some genuine receivers have a bulge in the center due to their solidity. In such cases, cocking can become difficult when the support ring wears out or when the ring is removed, as the cylinder rubs against it.
However, the PDI receiver maintains a straight inner diameter, which eliminates interference with the cylinder and allows for smooth cocking.

*Support rings cannot be used with PDI rifles. Cylinder friction will occur, but it will not affect actual shooting. The sensation is similar to that felt with APS and other bolt-action rifles.
*If it does not fit well with the outer barrel, try scraping the small hole in the threaded part of the outer barrel with a file or similar.
*When attaching the mount base, be careful not to tighten the screws too much. Using too much force may damage the screws on the receiver.

Specifications
■Compatible models:
#Compatible with Tokyo Marui VSR-10 series
(If you replace the receiver, you will need to use cylinder parts, handles, end caps, nutriggers, etc. that are specifically designed for the BORE UP receiver.)
■Material: Aluminum alloy
■Surface treatment: Black anodized

[About anodized aluminum products]
*During the anodizing process, unevenness or marks of a few millimeters may remain where the product is fixed.
*Since the screw part is inspected after the anodizing process, some of the anodizing on the screw part may peel off, resulting in silver areas, but if there is no problem with the functionality, we will treat it as a normal product.
*We have confirmed that the product can be used without any functional impact, so we do not accept returns or exchanges for cosmetic reasons.


※please note※
If you have customized your airsoft gun or replaced parts, be sure to measure the bullet speed using a bullet speed meter to ensure it is within the legal limit (possession of bullets over 0.98 J is prohibited). Also, be careful not to exceed the legal limit during the work.