[LayLax] Non-Liner Spring MS70-85 for High-Cycle Custom

The main spring is the most fundamental part in the concept of customization, and it is the part that determines the bullet velocity and firing cycle.
Prometheus has newly designed a high-speed model based on a huge amount of past data!
Not only has the material been carefully selected, but the winding pitch has also been completely revised, resulting in a new liner shape that is light to pull and strong to push, minimizing sagging!
Stabilizing bullet speed leads to improved accuracy.

Assuming high-cycle customization, it is MS70-85sp (barrel length limited to 110mm-260mm) which meets the Firearms and Swords Act regulations.
Bullet speed guide
MP5KHC (barrel length: 110mm) bullet speed: approx. 70m/s
G3SASHC (barrel length: 208mm) bullet speed: approx. 78m/s
AK47HC (barrel length: 230mm) bullet speed: approx. 80m/s
M4CRW (barrel length: 260mm) bullet speed: approx. 82m/s
Steyr HC (barrel length: 260mm) bullet speed: approx. 84m/s

[Compatible models]
Tokyo Marui High Cycle Custom Series

Check compatible devices here

[Points to note]
*If only the springs included in this set are installed in a standard electric gun, the bullet speed will exceed the regulations of the Firearms and Swords Act.
Also, internal parts will be damaged, so be sure to use this parts set in conjunction with other products.

[WARNING]
・After customizing, be sure to check the joule value and bullet speed.
Due to the revision of the Swords and Firearms Act, anyone exceeding the regulated limit of 0.989 joules will be subject to punishment!
Also, measurements will vary depending on the season, time of day, HOP adjustment, gun characteristics, etc.
Please use your air gun with a joule value that allows for some leeway!