[PDI] Light Outer Barrel / 569mm for Tokyo Marui VSR-10

Outer barrel compatible with all Tokyo Marui VSR-10 models.
This authentic barrel is made entirely from machined aluminum alloy with an inner diameter of 27mm (same diameter as G-SPEC) and a wall thickness of 1.75mm.
*When used in conjunction with receivers and other parts, they are designed to comply with genuine PDI products.

Pro Sniper size outer barrel that does not impair mobility
This lightweight outer barrel weighs just 250g. Its inner diameter is 27mm (same diameter as the G-SPEC) and its wall thickness is 1.75mm, so you can use the genuine G-SPEC cap. However, if you use a 430mm or 554mm inner liner, you will need to file down the inner diameter with a file or something similar. (The genuine cap has a step inside, so the inner liner cannot pass through.)
PDI bull barrel cap is also OK.

Difference from PDI Bull Barrel: The previous Bull Barrel was front-heavy and designed for precision shooting. This new Bull Barrel is designed to be optimal for scenario games and other situations where mobility is required.
Another point is that the bull barrel was a separate type, but the light outer barrel was a single piece. Although it lost its expandability, it has a more integrated feel.

●Please use the PDI G-SPEC barrel spacer (No. 631077) to hold the barrel.
●Both genuine receivers and PDI receivers (including BORE UP) can be used.

The screw part has a fixed pin hole.
Just like the genuine barrel, there are screw holes to secure it to the receiver after installation. This allows you to align the barrel and secure it firmly even if it is not in the exact position after turning it all the way.

The bullet feed port is carefully processed by cutting.
The chamber feed port area, which requires strict dimensions, has been carefully machined to recreate the steps and holes, preventing burrs and allowing for smooth attachment and detachment.

This light outer barrel is straight and not tapered. (CAP not included)

Specifications
■Compatible models:
#Tokyo Marui VSR-10
■Material: Aluminum alloy
■Surface treatment: Black anodized
■Size: Length 569mm (including screw)

[About anodized aluminum products]
*During the anodizing process, unevenness or marks of a few millimeters may remain where the product is fixed.
*Since the screw part is inspected after the anodizing process, some of the anodizing on the screw part may peel off, resulting in silver areas, but if there is no problem with the functionality, we will treat it as a normal product.
*We have confirmed that the product can be used without any functional impact, so we do not accept returns or exchanges for cosmetic reasons.


※please note※
If you have customized your airsoft gun or replaced parts, be sure to measure the bullet speed using a bullet speed meter to ensure it is within the legal limit (possession of bullets over 0.98 J is prohibited). Also, be careful not to exceed the legal limit during the work.