*A new system is used, so the operation method is different from that of a typical rifle.
Please be sure to read the instructions carefully before use.
This is a Japanese-spec product from an authorized domestic distributor. The magazine injection valve and other parts are optimized for Japanese gases.
ActionArmy's original gas-cocking rifle is here!
This is a gas-cocked rifle that uses gas as its power source.
With careful attention paid to weight, overall length, and width, it can be enjoyed in a variety of environments, from survival games to competitions.
2-way system that can be used as an air-cocking rifle with optional parts (sold separately)
Air cocking specification change compatible parts
C01-022 (required)
B01-007
B01-037
B01-015
You can enjoy it as a gas gun in the summer and as an air gun in the winter.
T10/VSR standard parts such as inner barrel, packing, chamber, magazine etc. can be used.
(Some are not supported)
【specification】
| full length
|
: |
900mm |
| Chassis width
|
: |
Approximately 42mm (excluding the cocking handle) |
| Stock width
|
: |
Approximately 32mm (cheek pad area)
|
| weight |
: |
Approximately 1,970g |
| Inner Barrel Length
|
: |
300mm |
| HOP
|
: |
Sliding variable |
| BB bullets used
|
: |
6mm |
| Magazine capacity
|
: |
50 rounds (VSR magazine compatible) |
| initial velocity
|
: |
0.98J or less (temperature 35°C) |
| Gas used
|
: |
HFC134A |
| Shear angle
|
: |
90° |
| Muzzle
|
: |
14mm reverse thread |
| QD swivel hole
|
: |
4 locations
|
Bipod base
Front sight with light-gathering tube
Up-down safety button
【accessories】
・Main unit x1
・Gas tank x2
・Magazine x1
・Japanese instruction manual x1
[Notes]
It is intended for use in temperatures between 20°C and 35°C.
Avoid direct sunlight and high temperatures when storing or using.
When warming the gas tank during cold weather such as winter, use a magazine warmer or hair dryer to warm it to body temperature.
Do not overheat as this can be dangerous.
* Raw gas may be blown out depending on the amount of gas injected and the temperature, but this is a specification.
It is not a malfunction.
The first few shots are especially prone to generating raw gas.
Please adjust the injection amount and warm it to the appropriate temperature before use.
*It may not be possible to fire all bullets with one gas injection.
The number of shots varies depending on the conditions.
*Do not cock the gun while pulling the trigger.
There is a risk of an explosion.
*Please do not discard the instruction manual and be sure to keep it on hand.
It cannot be reissued under any circumstances.
