No Products in the Cart
From overseas to domestically made toy guns, leave it to us when it comes to online shopping!
We are currently offering coupons to all registered members.
This is a custom spring for standard electric guns.
As the name Anti Shrink suggests, we placed the utmost importance on resistance to shrinkage.
It is designed with equal and fine pitch.
The free length is standardized to 150mm for all rates, the same as the original.
100% genuine spring for Tokyo Marui Standard Electric Gun Ver.2/3/6,
90%
Piston full forward load: 1.37kgf
Piston release load: 3.58kgf
100%
Piston full forward load: 1.55kgf
Piston release load: 4.05kgf
110%
Piston full forward load: 1.70kgf
Piston release load: 4.44kgf
120%
Piston full forward load: 1.88kgf
Piston release load: 4.90kgf
(All values are based on the load when used with the Tokyo Marui Ver.2 genuine gearbox and piston.)
There are four types in the lineup:
The test data on the actual device is as follows:
Gun used: Tokyo Marui P90
Barrel length: 247mm
Piston: Tokyo Marui genuine
Bullet used: G&G 0.2g bio bullets
Hop-up: Flattening strength when using Tokyo Marui genuine spring
Room temperature: 23℃
GAW ASS 90%: 80.86m/s
GAW ASS 100%: 84.73m/s
TM genuine: 84.57m/s
GAW ASS 110%: 89.92m/s
GAW ASS 120%: 94.81m/s
This value will vary depending on the gun used and the test environment.
Never exceed the muzzle velocity limit set by the revised Swords and Firearms Act.
Please handle with care.
*Precautions for use
If the spring is contracted to near its full length, it will easily sag.
Please refrain from using excessive spacers as this may damage the spring.