[KM Planning] KM Planning DNR Marui Electric MAC10 Dedicated KM Original Rail Set (3-Piece Set)

"How to install"

1. First, remove the silencer and the front of the MAC10 in the same way as you would remove the battery.
2. With the rails removed, align the frame lock with the main body and insert it from the front. When doing so, make sure that the left and right lock pins are in the center of the holes.
3. Secure the front sight hole, frame lock, and side mount with screws. The screw lengths for the front and rear are different, so be careful not to get them mixed up.
4. Attach the underrail. Attach the hook of the underrail to the trigger guard and align the frame lock with the recess. While slightly holding the frame lock to the side, use a hammer to evenly align the recess of the underrail, frame lock, and trigger guard hook.
There is a gap of about 1mm where the underrail of the frame lock is fixed. Please install it as is.
5. Secure the underrail and frame lock with screws. Tightening with too much torque will cause damage, so tighten lightly.
6. Attach the rear mount, upper mount, and side mount, then assemble the MAC10 front to complete the assembly.

[Material] Aluminum alloy
[Dimensions] Mount: 20mm Picatinny standard