【MANCRAFT】PDiK V2 Gen.3 HPA (Unit) JAPAN Ver.

PDiK V2 Gen.3 HPA (Unit Only) JAPAN Ver
MANCRAFT co2 unit.

This product is an HPA conversion unit for Ver2 standard electric guns.
The power source is CO2 gas, so it can be used regardless of weather conditions.
*(This unit is semi-auto only; full-auto firing is not possible.)
*It can be installed in a standard electric gun's Ver2 gearbox, allowing for easy HPA (CO2) conversion of your electric gun.
(Some processing may be required for installation.)
*If using a gearbox from an overseas manufacturer, significant modifications may be necessary for installation.
The nozzle included with the unit can be replaced with a standard electric gun nozzle. Please use nozzles from various manufacturers to suit your setup.
*Fixed nozzles or thicker nozzles may not be usable.
The trigger area can use standard electric gun parts.
Excellent trigger feel due to the direct push on the valve.
*There will be a gap of 0.5mm to 1.2mm between the trigger and the release valve, so if this bothers you, please use a trigger spring.
*Units sold by our company are sold as domestic specification (JPVer).
*This product requires knowledge of disassembly and assembly and is intended for advanced users.
*Please adjust to comply with legal initial velocity and use below 0.98j.
*When installing, always use the selector plate and safety lever.
*Our (JPVer) unit has been confirmed to operate with the domestic San Project regulator 0.55MPa.
If using a fixed pressure reducer regulator, please purchase the separately sold return spring.

Accessories
Unit body
1 gas flow adjustment spacer

Notes on installation
https://mracustomlab.militaryblog.jp/e1127164.html