Successor model to HYBRID PRO.
Improved compatibility and durability at a more affordable price!
The PERUN V2 Lightning JP-PRO is an electronic trigger unit equipped with optical and magnetic sensors. By replacing the physical switch, movable parts such as switches and cut-off levers are eliminated, thereby removing the risk of failure due to wear and tear.
Both the trigger and selector are detected by magnetic sensors (Hall effect). This ensures stable operation regardless of external light, gearbox color, or reflections, even in skeletonized cutout receivers.
An optical sensor is used to detect the sector gear, determining its position by the presence or absence of the cut-off cam.
The single-board design reduces the number of components, simplifies installation, and avoids risks such as poor contact and physical damage.
The MOSFET circuit provides highly efficient current flow, improving semi-auto response and full-auto rate of fire. Equipped with an electronic fuse and self-diagnostic function, eliminating the need for a physical fuse. Brushless motors are, of course, also supported.
JP-PRO Japan Limited Edition: Features 99-stage 2-phase adjustable pre-cocking. Includes a Japanese manual produced by PERUN JAPAN and comes with a 24-month manufacturer's warranty.
T-connector (Deans) specification: Please use a T-connector for the battery side as well.
【Key Changes from HYBRID PRO】
|
HYBRID PRO |
(NEW!) Lightning JP-PRO |
| Selector detection |
Optical (sticker affixed) |
Magnetic (with included selector plate / included magnet affixed) |
| Sector gear detection |
Optical (detects presence/absence of teeth) |
Optical (detects cut-off cam) |
| Electronic fuse |
Continuous 35A / Peak 200A |
Continuous 40A / Peak 220A |
| Standby current consumption |
All positions 1.5mA |
SAFE 0.4mA / SEMI・AUTO 0.6mA |
| Compatible sector gear |
Only gears with a lower gear protruding from the body, such as 32:1, are not compatible. |
Compatible with all gears with a cut-off cam. |
| KRYTAC / G&G G2 Gearbox |
Requires modification for installation. |
No modification required. |
【Feature List】
All functions can be set independently for SEMI/AUTO positions. Settings are configured via selector operation and trigger input, with status confirmed by a multi-color LED and beep sound.
■ Shooting Modes
Safety, semi, 2-5 round burst, full-auto, and binary can be assigned to each position as desired. Burst firing will always discharge the specified number of rounds with a single trigger pull.
■ Active Brake 5 Stages
Electrically brakes inertia after shooting, improving semi-auto crispness and preventing overruns. Can be set independently of pre-cocking.
■ Pre-Cocking 99 Stages (JP Special Specification)
Consists of a 2-phase configuration: coarse adjustment 10ms (0-9) and fine adjustment 1ms (0-9), allowing for up to 99 stages of adjustment. Pre-cocking strength is automatically compensated according to battery voltage. Spring release can be performed by holding the trigger for 3 seconds.
■ Binary Trigger
One shot is fired when the trigger is pulled and another when it is released. This is only active when semi-auto firing is set. Holding the trigger for 2 seconds cancels the shot on release.
■ 2-Stage Trigger
Different firing modes can be set for a shallow trigger pull and a full trigger pull. Supports three patterns: semi → burst / semi → full / burst → full.
■ Trigger Sensitivity / ATC 8 Stages
Adjustable from Lv.1 (6mm) to Lv.8 (0.25mm). The higher the sensitivity, the less the trigger needs to be returned after firing to allow the next shot (Adaptive Trigger Control).
■ Rate of Fire Reduction 5 Stages
Reduces the rate of fire only for full-auto and burst. Does not affect the response of the first shot. Absolutely do not use when using a brushless motor to prevent damage.
■ DMR Mode 5 Stages
Sets the incapacitation time before the next shot from 0.25 seconds to 3 seconds in 5 stages. Can also be used to prevent bump firing. Activating this function fixes the firing mode to semi-auto.
■ DSG Mode
Correctly reads the special shape of the double sector gear with sensors and optimizes pre-cocking timing.
■Safety and Protection Functions
Equipped with an electronic fuse (continuous 40A / peak 220A), LiPo alarm (automatic cell count detection), self-diagnostic system, and master reset.
【Specifications】
| Compatible Voltage |
： |
7V – 17V
|
| Allowable Current |
： |
Less than 50A continuous
|
| Compatible Battery |
： |
LiPo / Li-Ion 2-4 cell
|
| Compatible Cycle Rate |
： |
Less than 50 shots per second
|
| Compatible Brushless Motors |
： |
Option No.1 / WARHEAD / HTG |
| Compatible Gears |
： |
DSG / TSG / Helical, and any gear with a cut-off cam |
| Electronic Fuse |
： |
40A / Peak 220A
|
| Connector |
： |
T-connector (Deans)
|
| Trigger Detection |
： |
Magnetic |
| Selector Detection |
： |
Magnetic |
| Sector Gear Detection |
： |
Optical (Cut-off cam detection) |
【Installation Compatibility】
This product is for Tokyo Marui standard electric gun specification Ver.2 gearboxes.
*Adjustment or processing may be required due to individual differences or changes in gearbox specifications, so complete compatibility is not guaranteed.
■ Can be installed without modification
*Excluding models and types listed under "Requires some modification," "For advanced users," or "Incompatible."
- Tokyo Marui
- APS Silver Edge
- A&K
- BOLT
- Classic Army
- Double Bell
- Double Eagle
- G&G *G&G ETU triggers are not compatible. Please replace with a standard V2 trigger.
- G&P
- Golden Eagle
- ICS
- JG
- King Arms
- Retro Arms
- Specna Arms
- VFC
*Some ICS triggers may require modification for magnet holder attachment.
■ Requires some modification
- Some CYMA models (may require contact area polishing)
■ (For Advanced Users) Requires modification or calibration adjustment
Microswitch systems
While the gearbox itself does not require modification, attaching the magnet to the selector plate can be difficult, making installation challenging. For triggers, it is difficult to attach the magnet holder to genuine triggers, so we recommend replacing it with a Tokyo Marui standard M4 series trigger.
45° Selector systems
- G&G G2 (45° selector models)
Fine adjustment of the magnet fixing position and selector calibration are required. Due to the unique range of motion of 45° selectors, precise adjustment is needed for stable detection.
■ Incompatible
- ARES EFCS Series
- Classic Army ECS Series
- KSC/KWA ERG Series
- APS SDU
- PTS N-23
- G&G Firehawk HC-05
- Magnet-equipped sector gears
- Semi-auto only models
【Compatible Trigger Accessories】
*Even if Lightning can be installed in a model, separate processing may be required for accessory installation, or installation may be impossible.
■Clicker V2 PRO (Click to navigate)
This part replaces the magnet holder to add a click feeling. By using the included additional magnets, the trigger pull can be increased up to 3kg. It also supports physical safety.
■Speeder V2 Gen.2 (Click to navigate)
A trigger accessory developed for airsofters who prioritize trigger response and high trigger follow-up. Installing it achieves more agile and lighter trigger operation than standard triggers. It is a superordinate compatible model that includes the functions of Clicker V2 PRO.
【Precautions】
■ Regarding Installation
The listed specifications are the permissible values for the board. It is assumed that there are no problems with the electric gun being installed, and that gear clearances are properly adjusted and parts are correctly selected. If an improper installation leads to a load exceeding the manufacturer's expectations, or if the battery is connected in reverse, the safety circuit may not operate, potentially damaging the board.
Damage caused by individual installation is not covered by any warranty. If you have any concerns about the work, please ask a professional shop to perform the installation. This product requires knowledge and skill for installation, so we do not provide installation support for specific models. A certain amount of storage space and wiring space is required for installation.
The board is vulnerable to heat, so please be extremely careful when soldering. Damage or malfunction of the board due to customer's work is not covered by the warranty.
■ Precautions at Startup
When connecting the battery, always set the selector to the SAFE position and do not pull the trigger. If the selector is in a position other than SAFE, or if the trigger is pulled when starting up, it will not operate correctly.
■ Conjunction with Brushless Motors
Operation with HTG brushless motors from batches as of April 2026 has been confirmed, but product warranty does not cover problems caused by changes in brushless motor specifications. We do not guarantee operation with all brushless motors released in the future, nor with past batches of brushless motors.
■ Regarding Commercially Available Conversion Connectors
Do not use conversion connectors to connect the battery. Many "T-connector to Tamiya mini connector" conversion connectors widely available have reversed polarity, which can instantly damage the board. We will not be responsible for any problems arising from the use of conversion connectors. Connect the battery directly as much as possible.
■ T-connector Compatibility Issues
Always use branded connector terminals; do not use unbranded ones. We recommend T-connectors from brands such as "Eagle Model" and "LayLax."
![[PERUN] V2 Lightning JP-PRO with Japanese manual for Ver. 2 mechbox/M4, etc.](http://rock-et.jp/cdn/shop/files/5907622628597_1024x1024.jpg?v=1778560916)
