[LayLax] Wide-use Metal Chamber

Equipped with a stepless adjustable rotary type HOP mechanism!
●Compact design with high versatility!

This is a highly rigid die-cast metal chamber compatible with M4 series electric guns.
We aimed to improve accuracy and hop-up precision with a stepless rotary type hop-up mechanism.
In addition, the barrel clip uses an original shape to prevent the barrel from rotating or shaking.


*The contents are all the same. Only the packaging design is different.


■Compatible models:
G&G ARMAMENT M4 Series Electric Gun ARP9
・ARP556
・CM16 series ・GC16 series ・Fire Hawk
・Fire Hawk HC05

KRYTAC M4 Series Electric Gun, TRIDENT Series, LVOA-C
・LVOA-S
*Not compatible with KRISS VECTOR or TRIDENT47 CRB (TR47).

■Installation method:
1. Insert the hop dial from the rear of the metal chamber body and attach the O-ring.

2. Attach the hop chamber packing to the inner barrel and insert it from the front of the metal chamber body.

3. Attach the barrel clip and insert the Accura Sealing from the tip of the inner barrel.
*If a spring is inserted instead of an acura sealing, such as in a KRYTAC electric gun, please use the original spring.

4. Insert the hop tensioner from the top of the metal chamber body.

5. Attach the hop arm to the top of the metal chamber body and secure it with the hop arm pin and retaining ring.

●If parts are lost or damaged, please purchase a spare parts set separately.


■Note:
Please note that this is not compatible with Tokyo Marui electric guns.
*The color of the product may differ depending on the shipping date. Please note that even if the color differs, it will not affect the product performance.
*Even if a new model or a currently available unit is listed as compatible, it may not be compatible due to minor changes or specification changes made by the manufacturer without prior notice.
If you are considering purchasing, please be sure to check beforehand.
*This product does not include a hop tensioner. Please use the genuine one, or use our hop tensioner or air seal chamber packing (included with the hop tensioner).
・When using this product, we recommend using our inner barrel and chamber packing.
*Depending on the precision of the metal frame, there may be feeding problems or multiple rounds being fed. In such cases, it is necessary to adjust the position of the gear box and frame, and the play (backlash) of the magazine insertion port. Also, please note that overtightening the bolt that secures the stock can also cause feeding problems.
*This product is made to be tight to minimize play. Depending on the base (outer, etc.) you insert it into, it may not move back and forth smoothly. In that case, please slightly file down the tight parts before use.