DCI Guns 20mm Rail Conversion Cover for Tokyo Marui BOYS Electric Guns

20mm Rail Conversion Cover for Tokyo Marui BOYs Electric Guns

Simply snap it onto the rail of your BOYs electric gun to convert it to a 20mm rail width.
Four covers are included, and you can adjust the number you use depending on the width of the red dot sight.

The following optical devices may not be able to be fixed.

- Sites that are fixed using two screws → Cannot be installed because the rail pitch is different between 20mm rails and BOYS.

・Sites with protrusions on the backside of the rail → Installation is not possible due to rail pitch and width issues.

- Sites where the thickness of the part that passes through the rail groove is 4.6 mm or more → The groove width of BOYS is approximately 4.6 mm, so rods and screws that are thicker than that will not pass through.

*There may be some other optical devices that cannot be installed.

※Note※
If a metal thread locking agent comes into contact with the resin part, the resin will deteriorate and break. When using a thread locking agent, please use one that will not affect the resin.

Note: Made from ABS-like resin.
- It may be damaged if hit at close range.
・It may soften if left in a high temperature environment. Please be careful not to leave it on a car dashboard, in direct sunlight, or in other high temperature environments.
If the product is exposed to high temperatures and becomes soft, do not bend or touch it. Allow it to cool and return to its original hardness before resuming use.
・Please note that the materials and specifications of the product may be changed without notice for the purpose of improving or improving functionality.