Products (9763)

RETRO ARMS piston head, Aluminum It is made of high strength A7075, but the weight of the piston head and O-ring is 6.4g. Including the thrust bearings and fixing screws,...

RETRO ARMS piston head, Aluminum It is made of high strength A7075, but the weight of the piston head and O-ring is 6.8g. Including the thrust bearings and fixing screws,...

The piston head is made by RETRO ARMS and the body is made of EN AW7075 with a rubber damper built in. When combined with the company's CNC Cylinder Head,...

Tokyo Marui standard electric gun compatible with AR15/M4 receivers This is an ambidextrous custom charging handle made by EN AW7075 T651. Ejection port interlocking parts are not included, so please...

Tokyo Marui Standard AEG Compatible with AR15/M4 receivers This is a custom magazine catch made by EN AW7075 T651. It is now an ambidextrous type that can be operated from...

This anti-reverse latch uses a coil spring instead of the conventional torsion spring. Two types of coil springs are included, weak and strong, so you can use them depending on...

This anti-reverse latch uses a coil spring instead of the conventional torsion spring. Two types of coil springs are included, weak and strong, so you can use them depending on...

Based on the company's CNC Low Profile Bushing 8mm / 3mm This is a specially shaped 90MnCrV8 tool steel machined bearing with anti-rotation protrusions. One package contains 6 pieces. Compatible...

Tokyo Marui standard electric gun compatible with AR15/M4 receivers Custom bolt catch made from EN AW7075 T651. The material is EN AW7075 and the surface is color anodized, but there...

The company's CNC receiver AR15 - C NEW GEN and CNC receiver AR15 (Skeletonized) - C NEW GEN This is a buffer tube assembly with a one-touch attachment/detachment mechanism that...

Used for RETRO ARMS hop-up chambers Collet nut for fixing the barrel. This is a part made specifically for RETRO ARMS chambers, with special threads on the inside. The barrel...

RETRO ARMS cylinder head, A Standard is compatible with the general V2/V3. The nozzle pipe length is 15.8 mm. The body is machined from EN AW7075 and the cushioning is...

RETRO ARMS cylinder head, B Medium is for some models with long nozzles. The nozzle pipe length is 25.8 mm. The body is machined from EN AW7075 and the cushioning...

RETRO ARMS cylinder head, C Long has a special shape The nozzle pipe length is very long at 36mm. The body is machined from EN AW7075 and the cushioning is...

RETRO ARMS cylinder head, TM NGRS, Tokyo Marui Next Generation AR/M4 It has a special shape. It cannot be used with the V2 or V3 because the body shape is...

The diameter of the shaft that goes into the gearbox is Φ9.4mm to Φ9.95mm in 0.05mm increments. There are a total of 12 different custom motor towers in the lineup....

For standard AEG AR15, machined from a block of EN AW7075-T651 This is an end plate that is attached between the buffer tube and receiver. A standard QD attachment can...

Tokyo Marui standard electric gun compatible with AR15/M4 receivers This is a custom selector made by EN AW7075 T651. Includes the disc on the back of the selector, mounting screws,...

This is a dummy gas block that is compatible with a standard Φ19mm outer barrel. It is made from machined POM to reduce weight, weighing just 10.9g including the fixing...

This is a CNC gearbox compatible with Tokyo Marui's next-generation electric guns, AR series and HK416 series. It is manufactured entirely by cutting from a block of A7075-T651 extra-super duralumin....

Made entirely from EN AW7075-T651 ultra-super duralumin High precision, high strength gearbox for VFC AR series. VFC original bolt catch part mounting part and left and right connecting arm clearance,...

Made entirely from EN AW7075-T651 ultra-super duralumin High precision, high strength gearbox. Dramatically improved strength and precision compared to the original zinc gearbox The combined weight of the screws and...

[Authentic product from domestic distributor] This V2 gearbox is designed exclusively for DSG (Dual Sector Gear), a special gear that cocks twice in one rotation. Since DSG only pulls the...

*Bearing rails will be sold separately from the October 2025 batch. If you would like to purchase bearing rails, please purchase them separately. DSG (Dual Sector Gear) special gear that...