Installed in Tokyo Marui standard Ver.3 gearbox
A space-saving FET with an integrated switch.
It's a simple FET switch with no programmability whatsoever.
This package includes wiring.
The wiring on the motor and battery sides is Alpha Wire Eco Wire 16AWG (outer diameter Φ2.1mm),
Each one is 500mm long.
Furthermore
- 1 male T-type connector
・1 x 30A mini fuse
-Four Faston terminals
・Shrinkable tube set
It is a set.
Manufacturer recommended usage conditions
Battery voltage: 17V or less
Spring guide: M160 or less
Load in semi-automatic mode: 75A or less
Load in full auto mode: 25A for 30 seconds or less
*Note*
Soldering skills are required for installation. Be sure to use a fuse.
As stated in the instructions, be sure to remove the contact fittings on the selector plate.
Damage to the product itself caused by incorrect wiring or soldering will not be covered by the warranty.
In addition, installing these parts may void the manufacturer's warranty on the gun itself.
![[Jefftron] Mosfet - V3 with Wiring](http://rock-et.jp/cdn/shop/files/JT-MOS-W4_1024x1024.webp?v=1753333488)
![[Jefftron] Mosfet - V3 with Wiring](http://rock-et.jp/cdn/shop/files/JT-MOS-W4_1_1024x1024.png?v=1753333488)
![[Jefftron] Mosfet - V3 with Wiring](http://rock-et.jp/cdn/shop/files/JT-MOS-W4_medium.webp?v=1753333488)
![[Jefftron] Mosfet - V3 with Wiring](http://rock-et.jp/cdn/shop/files/JT-MOS-W4_1_medium.png?v=1753333488)
