[PDI] Receiver for Tokyo Marui VSR-10 Bore Up

[This is the core part for customizing your exterior!]
The first thing that makes PDI receivers, which are made entirely by CNC machining, superior to other receivers is the beauty of the surface treatment achieved through the meticulous machining process. The smoothness that cannot be reproduced through production using molds is comparable to that of custom parts manufacturers for real guns. Careful milling followed by sandblasting creates smooth curves, and the matte black anodized finish gives it a solid, subdued texture.

[High-precision receiver for easy integration]
Some genuine receivers have a bulge in the center due to their construction. If the support ring is worn or removed, the cylinder may rub against it, making it difficult to cock.
The PDI receiver has a straight inner diameter, which eliminates interference with the cylinder and allows for smooth cocking.
*Support rings cannot be used with PDI rifles. Cylinder friction will occur, but it will not affect actual shooting. The sensation is similar to that felt with APS and other bolt-action rifles.

[Reproduces the shape based on the M24]
To get closer to the original design, PDI has adapted the outer barrel joint to the Remington M24 series type. From the smooth taper of the stock, it has been changed to the stepped model of the Remington. This detailed reproduction will greatly shift the image.

*If it does not fit well with the outer barrel, try scraping the small hole in the threaded part of the outer barrel with a file or similar.
*When attaching the mount base, be careful not to tighten the screws too much. Using too much force may damage the screws on the receiver.

Specifications
■Compatible models:
#Compatible with Tokyo Marui VSR-10 series
(If you replace the receiver, you will need to use cylinder parts, handles, end caps, nutriggers, etc. that are specifically designed for the BORE UP receiver.)
■Material: Aluminum alloy
■Surface treatment: Black anodized

[About anodized aluminum products]
*During the anodizing process, unevenness or marks of a few millimeters may remain where the product is fixed.
*Since the screw part is inspected after the anodizing process, some of the anodizing on the screw part may peel off, resulting in silver areas, but if there is no problem with the functionality, we will treat it as a normal product.
*We have confirmed that the product can be used without any functional impact, so we do not accept returns or exchanges for cosmetic reasons.


※please note※
If you have customized your airsoft gun or replaced parts, be sure to measure the bullet speed using a bullet speed meter to ensure it is within the legal limit (possession of bullets over 0.98 J is prohibited). Also, be careful not to exceed the legal limit during the work.