[For fine-tuning initial velocity!] Each additional spacer increases the initial velocity by approximately 1-2 m/s.
This is an essential item for customization such as fine-tuning the initial velocity and compensating for spring wear.
[CNC machined from SUS304!] It is made by CNC machining SUS304 (stainless steel), so it boasts high durability.
*Please note
This product is for advanced users. The gun will need to be disassembled and reassembled during installation. If you are using multiple plates, make sure the piston retracts fully. Before using the battery, manually cock the gun to ensure the sear is engaged. We have confirmed that the device works with all five cards inserted, but depending on the springs and other conditions used, it may crash. Please be sure to check the device manually before operating it on battery power. This product is designed to be used with DAS springs. If a spring with a larger diameter is used, the spring may protrude.
Note
・Please note that the materials and specifications of the product may be changed without notice for the purpose of improving or improving functionality.
Recently viewed items
About Shipping
Ordered items will usually be shipped within 2 business days (excluding Saturdays, Sundays, and holidays).
*Excluding cases where the number of days is separately stated on the product description page, and pre-ordered or back-ordered items.
Shipping costs: ■Honshu, Shikoku, Kyushu: 880 yen ■Hokkaido, Okinawa: 1,380 yen
Any number of items ordered at the same time can be shipped together for one shipping fee.
If you have any requests regarding delivery date and time, delivery to a branch office, etc., please enter them in the "Message to our store" box displayed on the shopping cart screen.
Returns and Exchanges
If you are not satisfied with your product, please contact us within 7 days of delivery and we will refund your money.
However, there are conditions for returns, so please see our "Refund Policy" for details.
![[DCI Guns] Spring Spacer for GBLS DAS GDR-15](http://rock-et.jp/cdn/shop/files/DAS-SS-V10_1024x1024.jpg?v=1770709654)
Each additional spacer increases the initial velocity by approximately 1-2 m/s.
[CNC machined from SUS304!]
It is made by CNC machining SUS304 (stainless steel), so it boasts high durability.
*Please note
The gun will need to be disassembled and reassembled during installation.
If you are using multiple plates, make sure the piston retracts fully. Before using the battery, manually cock the gun to ensure the sear is engaged.
We have confirmed that the device works with all five cards inserted, but depending on the springs and other conditions used, it may crash. Please be sure to check the device manually before operating it on battery power.
This product is designed to be used with DAS springs. If a spring with a larger diameter is used, the spring may protrude.