[PDI] Front Bull Barrel L-Flute / for PDI VSR-10 Bull Barrel Base, PDI L96 Bull Barrel Base, 470mm

3mm deep, fully machined "Flute Barrel"

Fully machined from aluminum alloy. The nearly 6mm thickness makes it possible to create four sharp flutes with a depth of 3mm.
The flute length has also been extended to match the long outer size.

Original "L" size
This is made for the VSR-10 L size (when used with a bull barrel base), so the inner barrel is 554mm. Please purchase a spacer for the front bull barrel .
The inner diameter is tighter than the G-Spec due to the increased thickness, so a dedicated barrel spacer is required.
"Barrel spacer for front bull barrel" is compatible.
Two types of O-rings are installed inside and outside to hold the inner barrel in place and reduce vibration.
It is the perfect tool to improve shooting accuracy.

Specifications
■Compatible models:
#PDI Bull Barrel Base
■Material: Aluminum alloy
■Surface treatment: Black anodized
■Size: Length 470mm (including screw)

[About anodized aluminum products]
*During the anodizing process, unevenness or marks of a few millimeters may remain where the product is fixed.
*Since the screw part is inspected after the anodizing process, some of the anodizing on the screw part may peel off, resulting in silver areas, but if there is no problem with the functionality, we will treat it as a normal product.
*We have confirmed that the product can be used without any functional impact, so we do not accept returns or exchanges for cosmetic reasons.


※please note※
If you have customized your airsoft gun or replaced parts, be sure to measure the bullet speed using a bullet speed meter to ensure it is within the legal limit (possession of bullets over 0.98 J is prohibited). Also, be careful not to exceed the legal limit during the work.