Products (9771)

For standard AEG AR15, machined from a block of EN AW7075-T651 This is an end plate that is attached between the buffer tube and receiver. A standard QD attachment can...

Tokyo Marui standard electric gun compatible with AR15/M4 receivers This is a custom selector made by EN AW7075 T651. Includes the disc on the back of the selector, mounting screws,...

This is a dummy gas block that is compatible with a standard Φ19mm outer barrel. It is made from machined POM to reduce weight, weighing just 10.9g including the fixing...

This is a CNC gearbox compatible with Tokyo Marui's next-generation electric guns, AR series and HK416 series. It is manufactured entirely by cutting from a block of A7075-T651 extra-super duralumin....

Made entirely from EN AW7075-T651 ultra-super duralumin High precision, high strength gearbox for VFC AR series. VFC original bolt catch part mounting part and left and right connecting arm clearance,...

Made entirely from EN AW7075-T651 ultra-super duralumin High precision, high strength gearbox. Dramatically improved strength and precision compared to the original zinc gearbox The combined weight of the screws and...

[Authentic product from domestic distributor] This V2 gearbox is designed exclusively for DSG (Dual Sector Gear), a special gear that cocks twice in one rotation. Since DSG only pulls the...

*Bearing rails will be sold separately from the October 2025 batch. If you would like to purchase bearing rails, please purchase them separately. DSG (Dual Sector Gear) special gear that...

This is a gear set for V2/V3 made by RETRO ARMS. The shaft diameter is Φ3mm and the gear ratio is 10:1 (10.36:1). No sintered parts are used, all steel...

This is a gear set for V2/V3 made by RETRO ARMS. The gear ratio is 13:1 (13.65:1). No sintered parts are used, and all parts are made from machined steel...

This is a gear set for V2/V3 made by RETRO ARMS. The shaft diameter is Φ3mm and the gear ratio is 13:1 (13.65:1). This product has four pre-cut piston openings....

This is a gear set for V2/V3 made by RETRO ARMS. The gear ratio is 16:1 (17.28:1). No sintered parts are used, and all parts are made from machined steel...

This is a gear set for V2/V3 made by RETRO ARMS. The gear ratio is 20:1 (20.8:1). No sintered parts are used, all steel is machined and heat treated (around...

This is a gear set for the RETRO ARMS V2 long gearbox (19 teeth). The gear ratio is 20:1 (20.8:1). A long piston with 19 teeth is required. No sintered...

RETRO ARMS V2/V3 gear set allows you to cock three times in one go. This is a triple sector gear (TSG) set. The sector gear has 5 teeth x 3,...

This lightweight aluminum handguard conforms to the M-LOK standard and is compatible with various AR systems. The screws at the base of the handguard are compatible with Tokyo Marui and...

TubeRA type handguard with integrated handguard and outer barrel. The tube is made of 3K carbon pipe. The handguard base and barrel nut are EN AW7075-T651, muzzle is made of...

Tokyo Marui EVOLT Custom Hop-Up Arm for M4A1 Carbine "CNC Hop-Up Arm EVOLT AR15" The genuine one has a two-pronged arm that presses the hop-up pad directly, but By using...

This is a standard electric AK chamber made from machined duralumin. It is the same slide lever adjustment type as the genuine product, By inserting an O-ring into the lever,...

This is a standard electric AR15/M4 chambered from EN AW7075-T651. It can be used with the company's V2 series gearbox and Tokyo Marui-compliant Ver.2 gearbox. *Note* Since the shape is...

*Note* Since the shape is different from the UNI version before the minor change, it cannot be attached to the CNC Split Gearbox V2 with int. Hop Up Chamber UNI...

*Note* The maximum outer diameter of the part that goes into the outer barrel is Φ12.95mm. It fits most outer barrels, but It is 1mm thicker than the genuine Tokyo...

*This part is for advanced users who are familiar with disassembling and assembling electric guns* This is a left and right alignment adjustment part compatible with RETRO ARMS V2 gearboxes....

This is a high-strength, thin bearing machined from 90MnCrV8 tool steel. The compatible gear shaft is Φ3mm, and the bearing hole sizes are 6mm, 7mm, 8mm, and 9mm. One package...