Products (6564)

This is a low head screw used to secure the spring guide of the company's QSC mechanism. AK series and other rifles cannot fix the spring guide with the buffer...

RETRO ARMS CNC Gears PandoRA - Compatible with RATIO 10:1 (3mm) Special sector gear with adjustable tappet pins. It has a structure that allows you to place the screw-in tappet...

RETRO ARMS CNC Gears PandoRA - Compatible with RATIO 10:1 (3mm) Special sector gear with adjustable tappet pins. This product has three pre-cut piston openings. It is a short stroke...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. It has...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

RETRO ARMS CNC Gears PandoRA - Supports RATIO 16:1 Special sector gear with adjustable tappet pins. It has a structure that allows you to place the screw-in tappet pin at...

RETRO ARMS CNC Gears PandoRA - Supports RATIO 20:1 Special sector gear with adjustable tappet pins. It has a structure that allows you to place the screw-in tappet pin at...

RETRO ARMS CNC Gears PandoRA - Compatible with SR25 19 tooth RATIO 20:1 Special sector gear with adjustable tappet pins. A long piston with 19 teeth is required. It has...

チャンバー一体型V2ギアボックスがCNC Split Gearbox V2 with int. Hop Up Chamber ULTRA (8mm) - QSCとしてフルリニューアル！ 改良箇所 シリンダー保持方法改良 ピストンレール改良 ピストン位置確認窓の追加 回転止め付き軸受（別売り）対応 配線ルート拡張 タペットプレートガイド追加、前進量増加 左右アライメントパーツ（別売り）取付対応 前後位置と給弾パイプの長さが調整可能な専用チャンバーに変更 ※以前のバージョンと形状が異なるため互換性はありません。 パッケージ内容・ギアボックス・ネジ類・スプリングガイド一式   CNC Split Gearbox V2は、エアソフトレプリカAR15（M4）、M16およびV2ギアボックス搭載モデル向けに設計されています。 本製品には航空機用アルミニウム（ジェラルミン）EN...

Made entirely from EN AW7075-T651 ultra-super duralumin High precision, high strength gearbox. The strength and precision are dramatically improved compared to the original zinc gearbox. In addition, each part is...

This tappet plate is made entirely by cutting from a block of POM (Duracon). Compared to injection molding using a mold, the nozzle holder and the main body are at...

The company's CNC 3K-carbon Outer Barrel AR15 and CNC Hop Up Chamber AR15 ULTRA This is a dedicated long wedge clamp that is required when using in combination. CNC 3K-carbon...

This is a trigger safety lever that can be used with Tokyo Marui V2 standard gearboxes and RETRO ARMS V2 standard gearboxes. The shaft is machined from EN AW7075 T651,...

This is a nut part for mounting the inner barrel exclusively for the company's CNC Hop Up Chamber AR15 ULTRA . Great for spare parts or custom bases.

RETRO ARMS CNC Split Gearbox V2 (8mm) - Upper gearbox compatible with QSC 2025. Comes with a set of screws and a spring guide. *Note* Due to different structure, it...

Hop-up packing for standard AEG. Made of NBR (nitrile rubber). The lineup includes Shore A55 (soft) and Shore A70 (hard) in terms of hardness. ---------------------------------------------------------------------------------------------- It is a protrusion type...

This is a specially shaped hop-up packing for the company's CNC Hop Up Chamber AR15 ULTRA . The material is nitrile rubber and the hardness is Shore A 55. This...

This is a spring for the charging handle of a standard AR15 series electric gun. Please keep this as a spare in case of damage or loss.

Stainless steel gear shim. The size is inner diameter Φ4mm, outer diameter Φ8mm, thickness 0.1mm, and one package contains 20 pieces. It can be used with the company's CNC Gears...

This is a reinforced piston for the Tokyo Marui Next Generation AR15/M4. The compatible sector gear is for next-generation electric guns (half teeth) with 16 teeth. The body is made...

This is a holder part that holds the spring guide when temporarily assembling the gearbox. It can be tightened by hand, making the job much easier. Use this for frequent...

This is a special tool used to attach and detach the company's CNC Screw QSC . It has protrusions that fit into two holes on the head. The outer periphery...