[da Vinci Custom] M4 Trigger Guard Ver. BO / VSR-10

*Please note that this item is made to order and will take approximately one month from the time of order to shipping.

Aluminum trigger guard that can be attached to both VSR Pro Sniper and G-SPEC stocks.
Based on the shape of the actual custom parts, it adds a solid impression to the VSR-10.

A fully machined aluminum trigger guard modeled after the Badger Ordnance M4 trigger guard.
It features a protruding shape on both the front and rear sides and a design with the same thickness on the top and bottom.

This time, we have adopted A5052 as the material instead of duralumin.
In order to reduce the price compared to other products due to their shape and size, we have selected a different aluminum count without compromising the strength of the material.

The surface is treated with a blasting process followed by a matte anodized finish.

※Important points to note when installing: Part 1
When installing, first hook the tip of the hook onto the trigger, but it's okay if it only hooks a little.
Since it is mostly forced backwards due to the position of the rear pillar (plastic pillar) and the hole, the tip will not hook in very well. If you push it in too hard without knowing this, it will dig in, so make sure it only hooks in slightly.

※Points to note when installing: Part 2
In order to replicate the real thing, the trigger guard is made thicker than the OEM guard, so there is a possibility that it may rub against the stock hole. We recommend gently adjusting the width of the stock hole with sandpaper or similar, without rubbing the trigger guard against the stock hole.