No Products in the Cart
This external carbon dioxide (CO2) power system has a lower environmental impact than standard refrigerant gas. Its pressure changes little with temperature, maintaining stable power even in low-temperature environments or when the temperature drops due to rapid fire. It's also the most compact external-source system available. Due to its characteristics, it's a popular system in the speed shooting world, and with the increase in tatami room shooters due to the stay-at-home lifestyle, it's now experiencing a quiet boom.
Sun Project Green Gas System/External Power Source Coupler Plug & Connector Plug Set. Ver. II minimizes flow rate drop for more stable power supply.
Connector plug compatible: Tokyo Marui, Maruzen gas guns, etc.
Compatible with M4.5 pitch 0.5 screw diameter.
Connect a 6mm hose to the outlet of the external source and attach the coupler from this set to the other end of the hose.
Simply replace the injection valve of the gas gun magazine you are using with the connector in this set, and then simply join the connector and coupler to enjoy operation with an external source.
It is compatible with 6mm hoses and has a built-in air stop function that stops the air flow when the connector is removed from the coupler.
*Not compatible with older versions of couplers and connectors (SP-13, SP-14, SP-10).
[Installing a plug in a gas gun]
●Remove the injection valve from the gas gun and screw it in by hand instead.
If you screw it in too tightly, it may be damaged.
*When removing the injection valve, use a valve wrench.
[Attaching the coupler to the pressure-resistant hose]
●Attach to the hose on the power source side.
●Cut the end of the pressure-resistant hose straight and insert it securely all the way into the hose attachment port (black part).
●When removing the hose, push the release ring (black part) evenly all the way in and then pull the hose toward you.
[Coupler/plug installation]
Insert it until you hear a click. If it does not come off when you pull it, the installation is complete.
[Removing the coupler/plug]
Pull the coupler's release ring (the silver ring-shaped part) (towards the opposite side from the plug) to remove it from the plug.
Caution: Improper use may result in accidents or malfunctions.
■Do not leave within reach of small children.
■Depending on the gas gun, even if it is from the same manufacturer, the screw diameter of the injection valve may differ.
