[Jefftron] Scylla-V2 Rear Wiring Electronic Trigger

Replaces the switch on the Tokyo Marui Ver.2 gearbox or compatible gearbox.
It is a drop-in type ETU (Electronic Trigger Unit). It can be controlled via a smartphone application.
You can set various functions.

Scylla is a completely contactless ETU with a magnetically detected trigger and optically detected sector gear and selector.
Components are concentrated on a single board, making it compact and easy to incorporate.

The following models are not supported:

KWA gearbox V2.5
S&T or Arcturus gearbox V2
Ares Amoeba gearbox V2
APS eSilver edge gearbox V2
Microswitch type V2 gearbox
Other proprietary gearboxes

The following models are supported under certain conditions.
G&G G2 gearbox V2 (compatible with board version 2.1 and later, cut part of the board like KRYTAC)
KRYTAC V2 (part of the board cut)

The included magnet adapter is attached to the gun's original trigger.
Basically, no processing such as scraping or pasting is required.
You can freely set the trigger firing and reset positions in the application.

Optical sensors are used for the sector gear and selector plate detection switch.
Calibration can be easily performed using the app to accommodate individual differences.
This simple system detects the cutoff cam and is compatible with a wide variety of gears, including SSG, DSG, TSG, and torque-type half-rack gears, and can control up to 90 rps (90 rounds per second).

The external input port that was on the Leviathan has been omitted, and only an external output port that outputs battery voltage has been placed.

The connectors are pre-wired from the start, so no soldering is required.

The application can be downloaded here for both iOS and Android.
If you are using a smartphone, scan the QR code on the product packaging to access the download page.

The Japanese version of the instruction manual is here .

Scylla-V2 comes with a 2-year manufacturer's warranty from the date of purchase.
In the event of initial defects or damage during use, our store GAW will replace or repair the product.
When claiming a warranty, you will need proof of purchase (receipt or transaction history), so please keep it safe.

The following items are not covered by the warranty, and repairs will be charged and quoted on a case-by-case basis.

- Damage caused by water damage, improper handling, reversed polarity of the battery, or damage to the wiring (such as a short circuit caused by breaking the insulation).
Remove the original wiring from the board and replace it with new wiring (this can cause thermal damage)
- Damage caused by incorrect installation - Modifications made by the user (excluding extensions of wiring and connector replacement)
・Used products

Unit specifications Usable voltage: up to 13V
FET allowable current: Semi-auto 200A / Fully auto 100A
Allowable current of the entire unit: Detection within the range that can be used with an electronic fuse 100A, maximum controllable cycle: 90rps