[PDI] Light Outer Barrel, Very Short / 255mm for Tokyo Marui VSR-10

Outer barrel compatible with all Tokyo Marui VSR-10 models.
This authentic barrel is made entirely from machined aluminum alloy with an inner diameter of 27mm (same diameter as G-SPEC) and a wall thickness of 1.75mm.
*When used in conjunction with receivers and other parts, they are designed to comply with genuine PDI products.

A very short outer barrel that allows for light and agile movement.
Its length is a whopping 255mm! (including the threaded part)
It allows for close-range combat operations in tight spaces such as CQB.
Since it maintains the same specifications as the conventional light outer barrel, various attachments can be used as is.
The compatible inner barrel is 120mm long. *When using the 01 120mm inner barrel, the muzzle velocity will be approximately 70m/s when used in conjunction with the VC cylinder set and the "Variable Pitch Spring (Large Diameter) for 303mm Barrels / Tokyo Marui VSR-10" (muzzle velocity may vary depending on settings. Please use this as a guide only).

Differences from the PDI Bull Barrel Base
The Bull Barrel Base was originally developed for precision sniping by being expandable and front-heavy.
In this case, it was also possible to create a short VSR by using the bull barrel attachment.

This Light Outer Barrel Very Short has been developed with the assumption that it will be used as a standalone Light Outer, so you can use a Bull Barrel Cap (compatible with G-SPEC, etc.) or various suppressor attachments on the tip as is.

●Please use the PDI G-SPEC barrel spacer (No. 631077) to hold the barrel.
●Both genuine receivers and PDI receivers (including BORE UP) can be used.

The screw part has a fixed pin hole.
Just like the original barrel, there are screw holes to secure it to the receiver after installation. This allows you to align the barrel and secure it firmly even if it is not in the exact position after turning it all the way.

The bullet feed port is carefully processed by cutting.
The chamber feed port area, which requires strict dimensions, has been carefully machined to recreate the steps and holes, preventing burrs and allowing for smooth attachment and detachment.
This product is straight and not tapered.

【recommendation】
⇒■6.01 Inner Barrel 120mm / PDI VSR-10 Very Short

Specifications
■Compatible models:
#Tokyo Marui VSR-10
■Material: Aluminum alloy
■Surface treatment: Black anodized
■Size: Length 255mm (including screw)

[About anodized aluminum products]
*During the anodizing process, unevenness or marks of a few millimeters may remain where the product is fixed.
*Since the screw part is inspected after the anodizing process, some of the anodizing on the screw part may peel off, resulting in silver areas, but if there is no problem with the functionality, we will treat it as a normal product.
*We have confirmed that the product can be used without any functional impact, so we do not accept returns or exchanges for cosmetic reasons.


※please note※
If you have customized your airsoft gun or replaced parts, be sure to measure the bullet speed using a bullet speed meter to ensure it is within the legal limit (possession of bullets over 0.98 J is prohibited). Also, be careful not to exceed the legal limit during the work.