• Shipping fee is 880 yen for any number of items *Excluding Okinawa and remote islands
  • Business hours: Weekdays 10:00-18:00
SUN PROJECT SP-8000 Green Gas Regulator Set for Airsoft Guns
Sold Out
  • SKU: SP-8000

SUN PROJECT SP-8000 Green Gas Regulator Set for Airsoft Guns

18,300.00 AMD 22,800.00 AMD
Tax included. Shipping calculated at checkout.
Product Description

This external carbon dioxide (CO2) power system has a lower environmental impact than standard refrigerant gas. Its pressure changes little with temperature, maintaining stable power even in low-temperature environments or when the temperature drops due to rapid fire. It's also the most compact external-source system available. Due to its characteristics, it's a popular system in the speed shooting world, and with the increase in tatami room shooters due to the stay-at-home lifestyle, it's now experiencing a quiet boom.

Regulator set for Sun Project Green Gas System.

This set includes one 74g green gas cylinder and a dedicated regulator (pressure adjuster).

The discharge pressure can be adjusted from 0 to the maximum set pressure using the open/close knob on the top of the regulator. *Please use a separately sold hose pressure meter to measure the discharge pressure. Although it is convenient to have a meter, it can be used without one.

The regulator is equipped with a 6mm hose joint, allowing connection of a compatible pressure-resistant urethane hose or coil hose (hose sold separately).

Size: W43mm x D32mm x H74mm (including accessories) Weight: 240g
Maximum discharge pressure: 0.5MPa (±0.05MPa)

■Set contents: 1 regulator (with 6mm hose joint), 1 cylinder stand, 1 bottle of green gas 74g

■About the Green Gas System●The Green Gas System is a product that supplies stable pressure from the outside to recreational gas guns.
●Unlike refrigerant gas, there is no pressure drop due to drops in temperature in winter, and the pressure drop due to a drop in gas temperature that occurs during continuous firing is significantly less, so it can be used at a stable gas pressure throughout the year.
●The regulator has a maximum discharge pressure setting. The pressure cannot be changed beyond the setting.
●If abnormal pressure occurs inside the regulator due to the inflow of raw gas, etc., the safety valve will activate and release the internal pressure from the safety valve.

■Precautions for use●Never use gas cylinders other than genuine green gas.
●Never modify, alter or repair the regulator yourself.
After connecting to the gun, please check the bullet speed before use. Always measure at the regulator's maximum discharge pressure.
●When using carbon dioxide gas cartridges, please handle them correctly as described in the instruction manual for the device you are using.
●Avoid direct sunlight and do not place in places where the temperature exceeds 40°C.
●Even if a small amount of gas leaks out when installing, just screw it in all the way.
●After installation, do not remove from the appliance until all the gas has been discharged.
●Please use within the temperature range of 0 to 40°C.
●If white frost forms on the surface, do not touch it directly with your bare hands. Instead, wrap gloves or a cloth around it to remove it.
●After confirming that the seal of the used cartridge is punctured, dispose of it as non-combustible waste. Also, do not throw it into a fire.
●Please store in a safe place out of reach of children.

review

カスタマーレビュー

レビューはまだありません レビューを書く

Recently viewed items

BACK TO TOP