No Products in the Cart
This external carbon dioxide (CO2) power system has a lower environmental impact than standard refrigerant gas. Its pressure changes little with temperature, maintaining stable power even in low-temperature environments or when the temperature drops due to rapid fire. It's also the most compact external-source system available. Due to its characteristics, it's a popular system in the speed shooting world, and with the increase in tatami room shooters due to the stay-at-home lifestyle, it's now experiencing a quiet boom.
Sun Project Green Gas 74g cylinder.
This is a dedicated part for external power sources designed to provide stable pressure to gas guns.
The double-seal design prevents the gas from being released all at once even if the seal is accidentally opened due to contact or dropping, preventing accidents such as flying away.
However, once you have started using the cylinder, never remove it from the regulator until it has been used up.
Contents: Carbon dioxide (CO2/carbon dioxide gas) 74g (98cc)
Total length: 134mm
Body diameter: 40mm
■About the Green Gas System●The Green Gas System is a product that supplies stable pressure from the outside to recreational gas guns.
●Unlike refrigerant gas, there is no pressure drop due to drops in temperature in winter, and the pressure drop due to a drop in gas temperature that occurs during continuous firing is significantly less, so it can be used at a stable gas pressure throughout the year.
●The regulator has a maximum discharge pressure setting. The pressure cannot be changed beyond the setting.
●If abnormal pressure occurs inside the regulator due to the inflow of raw gas, etc., the safety valve will activate and release the internal pressure from the safety valve.
■Precautions for use●This cartridge is designed specifically for green gas standards.
●When using this cartridge, be sure to reduce the pressure using the dedicated pressure regulator (sold separately).
●When using carbon dioxide gas cartridges, please handle them correctly as described in the instruction manual for the device you are using.
●Avoid direct sunlight and do not place in places where the temperature exceeds 40°C.
●Even if a small amount of gas leaks out when installing, just screw it in all the way.
●After installation, do not remove from the appliance until all the gas has been discharged.
●Please use within the temperature range of 0 to 40°C.
●If white frost forms on the surface, do not touch it directly with your bare hands. Instead, wrap gloves or a cloth around it to remove it.
●After confirming that there is a hole in the seal of the used cartridge, dispose of it as non-combustible waste.
Also, do not throw it into fire.
●Please store in a safe place out of reach of children.
