Products (2938)

This is a reinforced piston designed specifically for the company's TSG . The body is made of injection-molded fiber-reinforced nylon, and the rack gear is made of fully machined spring...

This is a reinforced piston specially designed for DSG. The rack gear has 9 teeth and is compatible with both 8T and 9TDSG. The body is made of injection-molded fiber-reinforced...

This is a spare screw set for use with RETRO ARMS gearboxes . The set includes M3x12 3 pieces M3x6 3 pieces M2.5x3 1 piece Tappet plate spring post 1...

Spring for anti-reverse latch compliant with Ver.2 and 3. Please use it as a replacement or spare in case of damage.

Used for standard electric AR triggers It is a return spring. The pull is about twice as heavy as the genuine Tokyo Marui one. Trigger Pull Data Measuring equipment: Lyman...

This is a jig for press-fitting bearings. Place a pad on the backside and use a press, vise, clamp, etc. Press it in slowly.

*This part is for advanced users who are familiar with disassembling and assembling electric guns* This is a reinforced blowback connecting part made of EN AW7075-T651 (super duralumin). Tokyo Marui...

This is a nozzle inlet part exclusively for the company's CNC Hop Up Chamber AR15 ULTRA . The diameter of the part that meshes with the gearbox is Φ11.2mm. An...

Compatible with Tokyo Marui standard electric guns AR15/M4 series (V2 gearbox) This is a custom trigger made by EN AW7075 T651. Trigger spring is included. The surface is color anodized,...

The company CNC Hop Up Chamber AR15 BASIC CNC Hop Up Chamber AR15 PRO CNC Hop Up Chamber AR15 ULTRA This is a custom dial made of EN AW7075-T651 (super...

RETRO ARMS piston head, Aluminum It is made of high strength A7075, but the weight of the piston head and O-ring is 6.8g. Including the thrust bearings and fixing screws,...

The piston head is made by RETRO ARMS and the body is made of EN AW7075 with a rubber damper built in. When combined with the company's CNC Cylinder Head,...

Tokyo Marui Standard AEG Compatible with AR15/M4 receivers This is a custom magazine catch made by EN AW7075 T651. It is now an ambidextrous type that can be operated from...

This anti-reverse latch uses a coil spring instead of the conventional torsion spring. Two types of coil springs are included, weak and strong, so you can use them depending on...

This anti-reverse latch uses a coil spring instead of the conventional torsion spring. Two types of coil springs are included, weak and strong, so you can use them depending on...

Tokyo Marui standard electric gun compatible with AR15/M4 receivers Custom bolt catch made from EN AW7075 T651. The material is EN AW7075 and the surface is color anodized, but there...

The company's CNC receiver AR15 - C NEW GEN and CNC receiver AR15 (Skeletonized) - C NEW GEN This is a buffer tube assembly with a one-touch attachment/detachment mechanism that...

Used for RETRO ARMS hop-up chambers Collet nut for fixing the barrel. This is a part made specifically for RETRO ARMS chambers, with special threads on the inside. The barrel...

RETRO ARMS cylinder head, A Standard is compatible with the general V2/V3. The nozzle pipe length is 15.8 mm. The body is machined from EN AW7075 and the cushioning is...

RETRO ARMS cylinder head, B Medium is for some models with long nozzles. The nozzle pipe length is 25.8 mm. The body is machined from EN AW7075 and the cushioning...

RETRO ARMS cylinder head, C Long has a special shape The nozzle pipe length is very long at 36mm. The body is machined from EN AW7075 and the cushioning is...

RETRO ARMS cylinder head, TM NGRS, Tokyo Marui Next Generation AR/M4 It has a special shape. It cannot be used with the V2 or V3 because the body shape is...

The diameter of the shaft that goes into the gearbox is Φ9.4mm to Φ9.95mm in 0.05mm increments. There are a total of 12 different custom motor towers in the lineup....

For standard AEG AR15, machined from a block of EN AW7075-T651 This is an end plate that is attached between the buffer tube and receiver. A standard QD attachment can...