All products (6333)

This is a resin selector plate for use with the Ver.2 radio box and AR15 series. Since there are no metal contacts, care must be taken when combining it with...

This part is installed between the sector gear shaft and the tappet pin. The tappet opening time can be extended. The material is POM. When gluing, use Cemedine PPX or...

Derringer Total length: approx. 128mm Weight: approx. 57g ★All Crown Model airsoft guns comply with the revised Firearms and Swords Control Law and the Youth Healthy Development Ordinance. Please use...

This tappet plate is made entirely by cutting from a block of POM (Duracon). Compared to injection molding using a mold, the nozzle holder and the main body are at...

Bodyguard 380 (BODYGUARD380) Total length: approx. 128mm Weight: approx. 57g ★All Crown Model airsoft guns comply with the revised Firearms and Swords Control Law and the Youth Healthy Development Ordinance....

The diameter of the shaft that goes into the gearbox is Φ9.4mm to Φ9.95mm in 0.05mm increments. There are a total of 12 different custom motor towers in the lineup....

P2000 with silencerP2000 with silencerTotal length: approx. 271mm Weight: approx. 135g Silencer: Approx. 26g ★All Crown Model airsoft guns comply with the revised Firearms and Swords Control Law and the...

RETRO ARMS CNC Gears PandoRA - Compatible with SR25 19 tooth RATIO 20:1 Special sector gear with adjustable tappet pins. A long piston with 19 teeth is required. It has...

RETRO ARMS CNC Gears PandoRA - Supports RATIO 20:1 Special sector gear with adjustable tappet pins. It has a structure that allows you to place the screw-in tappet pin at...

RETRO ARMS CNC Gears PandoRA - Supports RATIO 16:1 Special sector gear with adjustable tappet pins. It has a structure that allows you to place the screw-in tappet pin at...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. It has...

P2000 P2000 Total length: approx. 150mm Weight: approx. 135g ★All Crown Model airsoft guns comply with the revised Firearms and Swords Control Law and the Youth Healthy Development Ordinance. Please...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

GLOCK 29C with silencer GLOCK 29C with silencer Total length: approx. 142mm Weight: about 100g Silencer: Approx. 26g ★All Crown Model airsoft guns comply with the revised Firearms and Swords...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

RETRO ARMS CNC Gears PandoRA - RATIO 13:1 Short stroke or RETRO ARMS CNC Gears PandoRA - Special sector gear with variable tappet pins compatible with RATIO 13:1. This product...

RETRO ARMS CNC Gears PandoRA - Compatible with RATIO 10:1 (3mm) Special sector gear with adjustable tappet pins. This product has three pre-cut piston openings. It is a short stroke...

RETRO ARMS CNC Gears PandoRA - Compatible with RATIO 10:1 (3mm) Special sector gear with adjustable tappet pins. It has a structure that allows you to place the screw-in tappet...

GLOCK 29C Glock 29C Total length: approx. 142mm Weight: about 100g ★All Crown Model airsoft guns comply with the revised Firearms and Swords Control Law and the Youth Healthy Development...

This is a gear set for the RETRO ARMS V2 long gearbox (19 teeth). The gear ratio is 20:1 (20.8:1). A long piston with 19 teeth is required. No sintered...

This is a gear set for V2/V3 made by RETRO ARMS. The gear ratio is 20:1 (20.8:1). No sintered parts are used, all steel is machined and heat treated (around...

This is a gear set for V2/V3 made by RETRO ARMS. The gear ratio is 16:1 (17.28:1). No sintered parts are used, and all parts are made from machined steel...

This is a gear set for V2/V3 made by RETRO ARMS. The gear ratio is 13:1 (13.65:1). No sintered parts are used, and all parts are made from machined steel...

This is a gear set for V2/V3 made by RETRO ARMS. The shaft diameter is Φ3mm and the gear ratio is 13:1 (13.65:1). This product has four pre-cut piston openings....